Tunable photovoltaic effect and solar cell performance of self-doped perovskite SrTiO3
نویسندگان
چکیده
Tunable photovoltaic effect and solar cell performance of self-doped perovskite SrTiO3 K. X. Jin,1 Y. F. Li,1 Z. L. Wang,1 H. Y. Peng,1 W. N. Lin,1 A. K. K. Kyaw,2 Y. L. Jin,3 K. J. Jin,3 X. W. Sun,2 C. Soci,1 and Tom Wu1,a 1Division of Physics and Applied Physics, School of Physical and Mathematical Sciences, Nanyang Technological University, 21 Nanyang Link, Singapore 637371, Singapore 2School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore 639798, Singapore 3Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, P. R. China
منابع مشابه
High efficient Perovskite solar cells base on Niobium Doped TiO2 as a Buffer Layer
Here, the effect of lightly Niobium doped TiO2 layer on the performance of perovskite solar cells has been studied by using solar cell capacitance simulator (SCAPS). N addition, the effects of Niobium concentration, buffer film thickness and operating temperature on the performance of the perovskite solar cell are investigated. For doping level of 3.0 mol% into the TiO2 layer, cell efficiency o...
متن کاملA nano-grid structure made of perovskite SrTiO3 nanowires for efficient electron transport layers in inverted polymer solar cells.
A nano-grid structure of perovskite SrTiO3 NWs is developed for a novel electron transport layer in inverted polymer solar cells. Due to the excellent charge transporting properties of the SrTiO3 nano-grid structure, the device employing this nanostructure showed ∼32% enhanced photovoltaic performance, compared to the solar cell using a TiO2 thin film.
متن کاملافزایش پایداری سلولهای خورشیدی با استفاده از لایههای جاذب پروسکایتی CH3NH3PbI3 آلاییده با برم
The CH3NH3PbI3 is one of the most widely used and famous lead halide perovskite absorber layer for using in perovskite solar cells. One of the ways to deal with the instability problem of this perovskite structure in environmental condition is bromide doping in this composition. In this work, the structural and optical properties of the bromide doped CH3NH3PbI3 absorber layers were studied as w...
متن کاملInvestigation of the Effect of Band Offset and Mobility of Organic/Inorganic HTM Layers on the Performance of Perovskite Solar Cells
Abstract: Perovskite solar cells have become an attractive subject in the solar energydevice area. During ten years of development, the energy conversion efficiency has beenimproved from 2.2% to more than 22%, and it still has a very good potential for furtherenhancement. In this paper, a numerical model of the perovskite solar cell with thestructure of glass/ FTO/ TiO2/...
متن کاملEffect of Electrochemically Deposited MgO Coating on Printable Perovskite Solar Cell Performance
Herein, we studied the effect of MgO coating thickness on the performance of printable perovskite solar cells (PSCs) by varying the electrodeposition time of Mg(OH)2 on the fluorine-doped tin oxide (FTO)/TiO2 electrode. Electrodeposited Mg(OH)2 in the electrode was confirmed by energy dispersive X-ray (EDX) analysis and scanning electron microscopic (SEM) images. The performance of printable PS...
متن کامل