Low-Frequency Digital Phase Meter
نویسندگان
چکیده
A microcomputer-controlled measuring instrument for phase angle measurement in low frequency range is described. It is based on the digital measurement of the time shift between input signals. To avoid the necessity of calculation of the measured phase shift, measurement of the time shift is repeated during a constant time interval to get the average value of the phase shift independent on the period of the input signals. The measured results are displayed on the display of the instrument and can be transferred into a personal computer (PC) which can process and display these results and control the instrument via USB serial interface. The method of the average value of the phase angle measurement is described and the error sources are briefly mentioned. The construction of the instrument and the software in the instrument and in the PC are briefly described. Measured results show sufficient accuracy of the instrument.
منابع مشابه
Low latency IIR digital filter design by using metaheuristic optimization algorithms
Filters are particularly important class of LTI systems. Digital filters have great impact on modern signal processing due to their programmability, reusability, and capacity to reduce noise to a satisfactory level. From the past few decades, IIR digital filter design is an important research field. Design of an IIR digital filter with desired specifications leads to a no convex optimization pr...
متن کاملLow Settling Time All Digital DLL For VHF Application
Settling time is one of the most important parameter in design of DLLs. In this paper we propose a new high speed with low settling time Delay Locked Loop (DLL) in which a digital signal processor (DSP) is used instead of using phase-frequency detector, charge pump and loop filter in conventional DLL. To have better settling time, PRP conjugate gradient algorithm is used to optimize delay of ea...
متن کاملAtmel AVR1631: Single Phase Energy Meter using XMEGA A
• Low-cost, Class 1 single-phase energy meter solution • Low and cost effective capacitive power supply • External low frequency crystal for RTC • Battery backup for internal RTC • LCD interface through GPIO • Multiple tamper detection • Multiple measurement parameters • One-time, quick, and accurate digital calibration gives added benefits • Internal EEPROM to store calibration parameters, tam...
متن کاملPhase meter calibration at NBS
National Bureau of Standards Gaithersburg, MD 20899 To provide a phase meter calibration service, a phase angle calibration standard has been developed at NBS. This standard is a signal. generator with two sinusoidal outputs and uses direct digital synthesis to generate the signals. The phase angle between the two sinusoids is determined by the input parameters in the calculation of the sets of...
متن کاملDesign and Implementation of Digital Demodulator for Frequency Modulated CW Radar (RESEARCH NOTE)
Radar Signal Processing has been an interesting area of research for realization of programmable digital signal processor using VLSI design techniques. Digital Signal Processing (DSP) algorithms have been an integral design methodology for implementation of high speed application specific real-time systems especially for high resolution radar. CORDIC algorithm, in recent times, is turned out to...
متن کاملNovel Phase-frequency Detector based on Quantum-dot Cellular Automata Nanotechnology
The electronic industry has grown vastly in recent years, and researchers are trying to minimize circuits delay, occupied area and power consumption as much as possible. In this regard, many technologies have been introduced. Quantum Cellular Automata (QCA) is one of the schemes to design nano-scale digital electronic circuits. This technology has high speed and low power consumption, and occup...
متن کامل