Soldering and brazing of copper and copper alloys
ثبت نشده
چکیده
منابع مشابه
Wettability of Brazing Filler Metals on Copper and Copper Alloys
The possibility of alloying can not be avoided at the interface between molten brazing filler metal and base metal in brazing, so the wettability of brazing filler metal can not be easily explained theoretically. We used the original apparatus for wettability test and investigated the relation between the wettability of brazing filler metals of Ag-P-Cu and Ag-Cu-Zn-Cd systems on copper and the ...
متن کاملDeveloping and Easing the Brazing Method
Brazing generally require cumbersome apparatus be it induction, vacuum or torch brazing. In torch brazing, metals are joined by using the oxyacetylene cylinder. It thus becomes difficult to carry out brazing at the places where it is not possible to take heavy gas cylinders and brazing apparatuses. So it is tried to figure out the method to carry out brazing at places where conventional brazing...
متن کاملInvestigation on effect of holding time in brazing of steel to cemented carbide using Cu-Ag alloy filler metal
Nowadays, cemented carbides-steels joints by brazing method are taken into consideration. One of the problems of these joints is the creation residual stresses that can reduce it with choose correct parameters of brazing. In this study, Silver base alloy filler containing copper, zinc and cadmium have been used in temperature 780°C and the effect of time parameter 5, 10 and 15 minutes on micros...
متن کاملSurface Segregation of Boron in Dispersion - Strengthened Copper
The improved yield strength of annealed dispersionstrengthened copper (DSC) over conventional OFE copper makes it a possible candidate for use in extremely high potential gradient particle accelerator structures where stability is of critical importance. Test brazes of such structures show that the surface of DSC is not readily wetted by conventional goldbased braze alloys used for copper. Surf...
متن کاملProcessing of Copper Anode-slimes for Extraction of Metal Values
Processing of anodic slimes from an Egyptian copper electrorefining plant, exhibiting high contents of copper, lead, tin and silver has been presented. The proposed hydrometallurgical process consists of two leaching stages for extraction of copper with H2SO4 – O2 and silver with thiourea – Fe. Pyrometallurgical treatment of the leaching solid residue for production of Pb-Sn soldering alloy was...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016