On the physics of moisture-induced cracking in metal-glass „copper-silica... interfaces

نویسندگان

  • J. C. Card
  • R. M. Cannon
  • E. Saiz
  • A. P. Tomsia
  • R. O. Ritchie
چکیده

Environmentally dependent subcritical crack growth, or stress-corrosion cracking, along ceramic-metal interfaces is studied for the silica glass-copper system. Tests were conducted in various gaseous and liquid environments in order to determine their relative effects on stress-corrosion cracking and to gain some insight into the mechanisms that control interfacial crack growth. In agreement with previous studies, interfacial crack-growth rates were found to vary by orders of magnitude depending on the moisture content in gaseous environments. Water and several organic liquids, namely n-butanol, methanol, and N-methylformamide, were also found to promote stress-corrosion cracking. Specifically, crack-growth behavior was found to be largely dependent on the molecular structure of the test environment. Crack growth at high velocities was limited by either transport of the reactive species to the crack tip or by viscous drag contributions. Results are discussed in the context of the current mechanistic models proposed for the stress corrosion of bulk silica. © 2007 American Institute of Physics. DOI: 10.1063/1.2775998

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ultra-fast Diagnostics of Laser-induced Melting of Matter in ns to μs Time-scales

The interaction of laser radiation with dielectrics and metals is detected with femtosecond resolution by pump&probe techniques (t = 80 fs or 3 ps, λ = 810 nm). Even with femtosecond laser radiation melt ejection dynamics can be observed by irradiating metals like copper or aluminium using time-resolved shadowgraphy. Laser-induced melt ejection has been observed in the time range of 100 ns to 1...

متن کامل

Flexural and Impact Properties of Stainless Steel based Glass Fibre Reinforced Fibre Metal Laminate under Hygrothermal Conditioning

Fibre metal laminates (FMLs) have appeared as the most suitable materials for shipbuilding, aeronautical and aerospace applications due to their superior mechanical properties over traditional materials. In this paper, degradation in flexural and impact properties of glass fibre/epoxy composite (GF/E composite) and stainless steel glass fibre/epoxy fibre metal laminate (SS FML) due to hygrother...

متن کامل

Effect of Thickness on Properties of Copper Thin Films Growth on Glass by DC Planar Magnetron Sputtering

Copper thin films with nano-scale structure have numerous applications in modern technology.  In this work, Cu thin films with different thicknesses from 50–220 nm have been deposited on glass substrate by DC magnetron sputtering technique at room temperature in pure Ar gas. The sputtering time was considered in 4, 8, 12 and 16 min, respectively. The thickness effect on the structural, mo...

متن کامل

Investigating the Performance Characteristics of Asphaltic Concrete Containing Nano-Silica

Using nano-technology materials in the asphalt pavement industry is new compared with Portland cement concrete. The main objective of this study is to investigate the effects of nano-silica modification on some properties of a penetration grade asphalt cement and a typical asphalt concrete. 60/70 penetration grade bitumen was modified with different percentages of nano-silica (i.e. 1, 3 and 5%,...

متن کامل

INFLUENCE OF THE PREPARATION METHOD ON THE STRUCTURE,PHASE FORMATION AND MAGNETIC PROPERTIES OF TEMPLATED CUFE2O4 SPINEL

The synthesis of mesoporous CuFe2O4 spinel by several nanocasting strategies (i.e., multi-step nanocasting, one step nanocasting, modified solid-liquid), in which copper and iron nitrates are used as precursors and Pluronic P123 as surfactant, is explored. We have also checked the effect of pH, citric acid and sodium citrate in multi-step nanocasting method. The modified solid-liquid method whi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007