Data related to the PC71BM loading and it's impact on nanostructuring for blend of PBDTTT-EFT:PC71BM bulk heterojunction solar cell
نویسندگان
چکیده
The data included in this article is based on additional supporting information presented in our recent publication Komilian et al. [1]. The role of acceptor material (PC71BM) in restructuring copolymer PBDTTT-EFT from its relaxed pristine structure to interfaces suitable for exciton dissociation is discussed. The analysis of data indicates that the impact of acceptor material on nanostructuring initiates concurrent processes some of which supports and some impedes charge extractions. Therefore, this manuscript is designed to identify these processes and give and account of their impact on power conversion efficiency.
منابع مشابه
High Efficiencies in Nanoscale Poly(3-Hexylthiophene)/Fullerene Solar Cells
A modified morphology was introduced for poly(3-hexylthiophene):phenyl-C71-butyric acid methyl ester (P3HT:PC71BM) bulk heterojunction (BHJ) solar cells by thermal and solvent annealing treatments in the presence of hydrophilic-hydrophobic block copolymers. Power conversion efficiency (PCE) plummet was prohibited during both thermal and solvent treatments for all BHJ devices modified wit...
متن کاملSupporting Information Thermal Conductivity of Organic Bulk Heterojunction Solar Cell: Unusual Binary Mixing
SI-Figure 1. Phase signal obtained from lock-in amplifier used to determine the thermal conductivity of BHJs (PBDTTT-EE and PBDTTT-DD respectively). BHJs composed of different PCBM volume fractions are presented in different colors. Experimental data are indicated as open circles, and the corresponding fits are shown in solid lines. Inset: acoustic echoes used to determine the actual aluminum f...
متن کامل- 1 - High efficiency arrays of polymer solar cells fabricated by spray - coating in air
We present bulk heterojunction organic solar cells fabricated by spray-casting both the PEDOT:PSS hole-transport layer (HTL) and active PBDTTT-EFT:PC71BM layers in air. Devices were fabricated in a (6 x 6) array across a large-area substrate (25 cm) with each pixel having an active area of 6.45mm. We show that the film uniformity and operational homogeneity of the devices are excellent. The cha...
متن کاملSquaraine based solution processed inverted bulk heterojunction solar cells processed in air.
Inverted bulk heterojunction solar cells based on low temperature solution processed squaraine (SQ) and [6,6]-phenyl C71 butyric acid methyl-ester (PC71BM) with varying blend ratios were made in air. An optimized bulk heterojunction device of SQ and PC71BM (with a blend ratio of 1 : 6) showed a power conversion efficiency (PCE) of 2.45% with an incident photon to current conversion efficiency o...
متن کاملImprovement of light harvesting by inserting an optical spacer (ZnO) in polymer bulk heterojunction solar cells: A theoretical and experimental study
By introducing a thin ZnO layer as an optical spacer, we have demonstrated that inserting this layer between an active layer and a reflective electrode results in a re-distribution of the optical electric field inside bulk heterojunction solar cells. A theoretical analysis by optical modeling showed that the thin ZnO layer could shift the position of the maximum of the electric field into the a...
متن کامل