Keratin/Polyvinyl Alcohol Blend Films Cross-Linked by Dialdehyde Starch and Their Potential Application for Drug Release
نویسندگان
چکیده
Feather keratin (FK) extracted from feathers represents a valuable source of biodegradable and biocompatible polymer. The aim of this study was the development and characterization of blended films based on FK and polyvinyl alcohol (PVA) cross-linked by dialdehyde starch (DAS) for a potential drug release application. The compatibility of FK/PVA was improved when cross-linked by DAS: the relative crystallinity of the PVA/FK film slightly decreased, and the enthalpy value for the melting peak decreased by about 50% for the cross-linked films. The total soluble mass of all blend films in water was below 35% at 37 °C, indicating a good stability of the films in water. The results of the Rhodamine B dye (as a model drug) release tests showed that the release rates decreased with increasing DAS content. DAS-induced cross-linking improves several important properties of the FK/PVA films, such as the compactness, the compatibility, and the stability in water. These improvements offer the potential to expand the application of FK films in the biomaterial field. OPEN ACCESS Polymers 2015, 7 581
منابع مشابه
Preparation and Characterization of Keratin blended Films Using Biopolymers for Drug Controlled Release Application
Keratin solution was separately blended with collagen, gelatin, sericin and starch for films preparation. All the blended films had smooth surfaces without phase separation, except the keratin/ starch blend film. The native keratin film showed small particles embedded in all the film surfaces that resulted in them being rough. The structure of the native keratin film changed from beta-sheet to ...
متن کاملChitosan and polyvinyl alcohol composite films containing nitrofurazone: preparation and evaluation
Objective(s): The aim of this study was to insert nitrofurazone in a chitosan membrane to be used as a wound dressing. Materials and Methods: Several blend films using chitosan (Cs) and polyvinyl alcohol (PVA), containing nitrofurazone were prepared by means of casting/solvent evaporating technique. Different characteristics such as mechanical properties, water vapor transmission rate...
متن کاملThe effect of temperature and water absorption on enzymatic degradation of starch / polyvinyl alcohol blend film by α-Amylase
Thermoplastic starch (TPS) materials present several advantages to the plastic industry andwhen blended with other materials they can exhibit improved mechanical and moisturesensitivity properties compared to pure TPS materials. Further investigations on TPS: PVAblends are of particular interest due to their excellent compatibility and improved properties suchas tensile strength, elongation, to...
متن کاملMechanochemical Activation of Carboxy Methyl Cellulose and Its Thermoplastic Polyvinyl Alcohol/Starch Biocomposites with Enhanced Physicochemical Properties
Polyvinyl alcohol (PVA) / starch (S) /Carboxy methyl cellulose (CMC) composite films were prepared from PVA, three different loading of CMC and soluble starch aqueous suspensions by casting method in the presence of plasticize containing glycerol. The effects of the CMC addition on the some physical properties of the resulted blend films were investigated. Tensile tests demonstrated positive re...
متن کاملSemi-IPN Films and Electrospun Nanofibers Based On Chitosan/PVA as an Antibacterial Wound Dressing
The antimicrobial activity of a wound dressing is a key factor for preventing and treating wound infection. The current study evaluated the physiochemical properties and antimicrobial activities of semi-IPNs (interpenetrating polymer networks) based on chitosan/polyvinyl alcohol (PVA) films and nanofibers as candidates for wound dressings and investigated the effects of morphologies (nanofibrou...
متن کامل