Rolling friction and bistability of rolling motion
نویسندگان
چکیده
The rolling motion of a rigid cylinder on an inclined flat viscous surface is investigated and the nonlinear resistance force against rolling, FR(v), is derived. For small velocities FR(v) increases with velocity due to increasing deformation rate of the surface material. For larger velocity it decreases with velocity due to decreasing contact area between the rolling cylinder and the deformed surface. The cylinder is, moreover, subjected to a viscous drag force and stochastic fluctuations due to a surrounding medium (air). For this system, in a wide range of parameters we observe bistability of the rolling motion. Depending on the material parameters, increasing the noise level may lead to increasing or decreasing average velocity.
منابع مشابه
Analytical Modified Model of Cold Rolling Process and Investigation of the Effect of Work Roll Flattening on the Rolling Force
Cold rolling of steel is one of the most important metal forming processes so an accurate control of its parameters during the process is necessary. In this paper, the friction coefficient has been proposed as a function of cold rolling parameters such as forward slip, forward and backward tensile stresses ,strip thickness, static deformation, resistance of strip before and after rolling ,strip...
متن کاملNew Method of Determination for Pressure and Shear Frictions in the Ring Rolling Process as Analytical Function
Ring rolling is one of the most significant methods for producing rings with highly precise dimensions and superior qualities such as high strength uniformity, all accomplished without wasting any materials. In this article, we have achieved analytical formulas for calculating the pressure and shear friction over the contact arcs between the rollers and ring in the ring rolling process for the ...
متن کاملInvestigation of Friction Coefficient Effects on Fishtail Defect in Hot Ring Rolling Process
Hot ring rolling is a highly nonlinear, unsteady-state and asymmetry process which is affected by many parameters. The friction coefficient between the ring ,the driver roll and the idle roll is one of the problems, which has significant effect on the quality of final product. In this study, the effect of these two parameters on hot ring rolling was investigated based on a 3D coupled-thermo mec...
متن کاملAnalyzing Effect of Friction on Spread and Budge in Flat Rolling by FEM Method
In this research a final element model for simulating three dimensional deformation in rolling of flat product is modeling in ABAQUS and further developed to study the frictional effects on spread and bulge. To predict the magnitude of bulging , the rolling process is approximated by successive forging steps. The elongation or the average spread at each step from the previous calculations are u...
متن کاملAnalytical Modified Model of Cold Rolling Process and Investigation of the Effect of Work Roll Flattening on the Rolling Force
Cold rolling of steel is one of the most important metal forming processes so an accurate control of its parameters during the process is necessary. In this paper, the friction coefficient has been proposed as a function of cold rolling parameters such as forward slip, forward and backward tensile stresses ,strip thickness, static deformation, resistance of strip before and after rolling ,strip...
متن کامل