Effect of strengthened road vibration on performance degradation of PEM fuel cell stack

نویسندگان

  • Yongping Hou
  • Dong Hao
  • Jianping Shen
  • Ping Li
  • Tao Zhang
  • Hong Wang
چکیده

The vehicular fuel cell stack is unavoidably impacted by the vibration and shock in the real-world due to the road unevenness. However, influences of vibration on fuel cell stack have yet to be investigated completely. In this paper, the performance of a fuel cell stack is experimentally studied in terms of gas-tightness, voltage degradation, AC impedance spectra, polarization curve and characteristic parameters in polarization curve through long-term strengthened road vibration tests, in order to investigate the influences of roadinduced vibration on performance degradation of fuel cell stack. The vibration tests are carried out on a six-channel multi axial simulation table with the vibration excitation spectra originally derived from the strengthened road of the ground prove. During the vibration test, several kinds of performance test including gas-tightness test, AC impedance diagnosis and polarization curve test are conducted at regular intervals. After the vibration test, the gas leakage rate of anode reaches 1.73 times of the initial value. The open circuit voltage and rated voltage decreases by 0.90% and 3.58%, respectively. Meanwhile, the performance of individual cell voltage uniformity becomes worse distinctly. With the increase of vibration duration, the ohmic resistance obtained from AC impedance diagnosis ascends approximately linearly and presents a growth of 5.36% ultimately. An improved empirical fuel cell polarization curve model is adopted to fit the currentevoltage data and estimate the characteristic parameters which decide the shape of polarization curve. It is noted that the limiting current density declines distinctly and the mass transfer loss increases mainly at the range of high current densities. The results indicate that the long-term strengthened road vibration condition exerts a significant influence on the durability of fuel cell stack. Copyright © 2016, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Sealing Gas Washer Design on a PEM Stack Fuel Cell Performance

In this paper we study the performance of a PEM stack fuel cell after 900 hours of operation. We tried to identify any voltage degradation and its causes. Microscopic cracks on some parts of MEA mainly due to uniformity of pressure, stress concentration and elongation of membrane in the edge of GDL has been identified as the most important cause of this gradual degradation. High contact resista...

متن کامل

Modeling and simulation of a new architecure stack applied on the PEM Fuel Cell

To simulate a new economical architecture for PEM fuel cell and investigate the effectiveness of the introduced structure on the performance, computational fluid dynamics (CFD) code is used to solve the equations for a single domain of the cell namely: the flow field, the mass conservation, the energy conservation, the species transport, and the electric/ionic fields under the assumptions of st...

متن کامل

Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization

Proton exchange membrane fuel cells (PEMFCs) with a dead-ended anode and cathode can obtain high hydrogen and oxygen utilization by a comparatively simple system. Nevertheless, the accumulation of the water in the anode and cathode channels might cause a local fuel starvation degrading the performance and durability of PEMFCs. In this study, a brand new design for a polymer electrolyte membrane...

متن کامل

Energy Management Simulation in a PEM Fuel Cell System

In this research the simulation of an air independent Proton Exchange Membrane Fuel Cell (PEMFC) propulsion system was taken into consideration. The system consists of several parts including PEM fuel cell stack, metal hydride and liquid oxygen (LOX) tanks, and also pre-heaters of oxygen and hydrogen gases along with other heat exchangers, to ensure proper operation of system. The heat recovery...

متن کامل

A review of the main mechanisms of catalyst layer degradation in polymer electrolyte membrane fuel cell (PEMFC) and different performance recovery methods

This paper reviewed over 100 articles on the subject of the mechanism of catalyst layer (CL) degradation and the effect of various contaminations in the polymer electrolyte membrane fuel cell (PEMFC). Also the recovery of PEMFC via different types of methods, the causes and fundamental mechanisms of cell degradation and their influence on long- term performance of PEM fuel cell were discussed i...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016