Comparison of Measured and Calculated Thermophysical Properties of Nickel Super-alloys
نویسنده
چکیده
A. Kalup, S. Zlá, M. Kawuloková, J. Dobrovská, B. Smetana, VŠB-TU Ostrava, FMME, Ostrava, Czech Republic Three real grades of nickel super-alloys (IN 713LC, IN 738LC and IN 792-5A) were investigated and values of temperatures of phase transformations and latent heats of melting were obtained. All investigated quantities are very important for thermodynamic and kinetic modelling. Moreover, these data are also valuable for a lot of software used for technological processes modelling. Experimental values were obtained using Differential Thermal Analysis (DTA) measurements. Calculations were performed using Thermo-Calc 3.1 software with the use of three different databases (SSOL5, TTNI8 and TCNI6). Comparison and discussion of experimental and calculated data was performed.
منابع مشابه
Synthesis and Characterization of Nickel Zinc Ferrite Nanoparticles
In this research nickel zinc ferrite nanoparticles with composition of Ni1-xZnxFe2O4 (where x=0, 0.3, 0.7, 1) were synthesized by a sol-gel method at 600 °C for 5 hours. The structure of nanoparticles was studied using X-ray diffraction pattern. The lattice parameter of ferrite nanoparticles was calculated and indicates lattice constant of nanoparticl...
متن کاملAn Experimental Study on Thermophysical Properties of Multiwalled Carbon Nanotubes (RESEARCH NOTE)
Nanofluids are the heat transfer fluids having remarkable thermal properties. The paper presents the experimental analysis of thermal conductivity, density, specific heat and viscosity of multiwalled carbon nanoparticles dispersed in water at various temperatures and particle concentrations. To examine the forced convection heat transfer of Multiwalled Carbon Nanotubes (MWCNT)-water nanofluid, ...
متن کاملThe Effect of Nickel Increasing and Aluminum Addition on Sulfidation Resistance of Fe-Ni-Cr Alloys (TECHNICAL NOTE)
In this research the effects of; increasing the amount of nickel and adding aluminum to create and prolong sulfidation resistance of Fe-Ni-Cr alloys have been investigated. Sulfidation tests were carried out at 1100°C in S/O bearing atmosphere. Prior to the tests, the specimens were annealed in argon at 1250°C for 8 hrs. Weight changes were measured and corroded deposits were analyzed byscannin...
متن کاملInvestigation of Cutting Forces Superalloy Inconel 718
Since the cutting tools used in machining process of super alloys are subjected to high cutting forces, accordingly tools life is reduced, therefore improvement in alloys machining and reducing cutting forces to achieve longer tools life is an essential necessity. In this research, the effect of changes in feed rate on cutting forces in machining process of nickel based super alloys is investig...
متن کاملThermophysical Properties of Undercooled Alloys: An Overview of the Molecular Simulation Approaches
We review the studies on the thermophysical properties of undercooled metals and alloys by molecular simulations in recent years. The simulation methods of melting temperature, enthalpy, specific heat, surface tension, diffusion coefficient and viscosity are introduced and the simulated results are summarized. By comparing the experimental results and various theoretical models, the temperature...
متن کامل