Study on Online Detection and Fault Diagnosis of Band Saw Equipment
نویسندگان
چکیده
Due to the size and material changes and the hard impurities of the cutting workpieces in the band sawing process, the load of the band saw blades changes greatly so as to easily break the blades. The load of the band saw blades in the cutting process is unbalanced so as to easily produce the deviation of the saw blade’s cutting path, even seriously affect the accuracy of the sawing. On the occasion of the heavy cutting to some materials, the artificial cutting is time consuming and laborious, and the efficiency is low. So there is an urgent need to develop the automatic weighing and measuring device for the band sawing machine. At the same time, the CNC technology is widely used in the high-level band saw machine. So the online detection technology of the band saw equipment is an important foundation for the solution of the above problems and the application of the numerical control technology [1-4]. Aiming at the lower automation, accuracy and efficiency of the domestic band sawing machine, this paper studies the real-time detection technology based on the sawing load, and the control system of the constant power sawing. The real-time detection technology based on the micro-deviation of the band saw’s trajectory and the deviation-correction control system are studied. The weight-detection technology based on the scan reconstruction of the surface profile size and the control system of the fixed weight are researched. That can improve the accuracy and efficiency of the band sawing machine and provide the foundation for the realization of the digital control of the band sawing machine. The fault diagnosis for the band sawing machine at home supplies usually the alarm information and the alarm lamp output when the proximity switch or contact switch collects the information over the designated station [5]. The fairly advanced band sawing machine has the HMI display to supply the alarm information. Those are low in the automatic diagnosis. The high-level CNC band sawing machine has the complex structure, and influenced by many factors. If the failure in the processing state can be not timely and accurately diagnosed, the machine will not be able to protect the manufacturing quality and accuracy. It will cause the waste to increase, the productivity to decline, or even result in a significant loss of the machine scrap. That urgently needs to introduce the dynamic monitoring and control with the intelligent diagnostic technology. The abnormal recognition and intelligent maintenance On li V rsi on O nly .
منابع مشابه
Online Fault Detection and Isolation Method Based on Belief Rule Base for Industrial Gas Turbines
Real time and accurate fault detection has attracted an increasing attention with a growing demand for higher operational efficiency and safety of industrial gas turbines as complex engineering systems. Current methods based on condition monitoring data have drawbacks in using both expert knowledge and quantitative information for detecting faults. On account of this reason, this paper proposes...
متن کاملOnline Monitoring and Fault Diagnosis of Multivariate-attribute Process Mean Using Neural Networks and Discriminant Analysis Technique
In some statistical process control applications, the process data are not Normally distributed and characterized by the combination of both variable and attributes quality characteristics. Despite different methods which are proposed separately for monitoring multivariate and multi-attribute processes, only few methods are available in the literature for monitoring multivariate-attribute proce...
متن کاملFUZZY BASED FAULT DETECTION AND CONTROL FOR 6/4 SWITCHED RELUCTANCE MOTOR
Prompt detection and diagnosis of faults in industrial systems areessential to minimize the production losses, increase the safety of the operatorand the equipment. Several techniques are available in the literature to achievethese objectives. This paper presents fuzzy based control and fault detection for a6/4 switched reluctance motor. The fuzzy logic control performs like a classicalproporti...
متن کاملFault Detection Based on Type 2 Fuzzy system for Single-Rod Electrohydraulic Actuator
Electro-hydraulic systems with regards to the their specific features and applications among other industrial systems including mechanical, electrical and pneumatic systems, have been widely taken into consideration by the scientists and researchers. Due to the fact that the electro-hydraulic system is inherently a nonlinear system, has some problems such as signals saturation, nonlinear effici...
متن کاملFault Diagnosis and Fault-Tolerant SVPWM Technique of Six-phase Converter under Open-Switch Fault
In this paper, a new open-switch fault diagnosis method is proposed for the six-phase AC-DC converter based on the difference between the phase current and the corresponding reference using an adaptive threshold. The open-switch faults are detected without any additional equipment and complicated calculations, since the proposed fault detection method is integrated with the controller required ...
متن کامل