Laser Beam Homogenizing: Limitations and Constraints
نویسندگان
چکیده
Laser beam homogenizing and beam shaping are key enabling technologies for many applications today. Periodic microlens arrays are widely used to transform Gaussian or non-uniform beam profile into a uniform “flat-top”. Each microlens element samples the input beam and spreads it over a given angular distribution. Incoherent beams that are either temporally or spatially incoherent can produce very uniform intensity profiles. However, coherent beams will experience interference effects in the recombination of the beams generated by each individual microlens element. Rotating or moving elements, such as a rotating diffuser or a vibrating optical fiber, are used to average these interference patterns. An integration of several different patterns will smooth out the intensity profile. Unfortunately, this averaging is not always possible. Some applications require a single shot from a pulse laser or work at very high data rates that do not allow an averaging over 10 to 50 frames. We will discuss the concepts of Köhler illumination and Köhler integrators and its limitations and constrains for laser beam homogenizing. We will show how micro-optical elements comprised of a randomly varying component can be used to smooth out interference and speckle effects within the far-field intensity profile.
منابع مشابه
Nominal Hazard Zone in Medical Laser Centers
Control the laser beam hazards for class IIIB and IV laser is concluded: engineering and executive controls. In executive control, when laser beam enters to the free space, the controlled area must be identified to protect people and control the radiation exposure limits. Given the fact that the laser light of the laser is entering the environment, the identification of the area under control i...
متن کاملABCD matrix for reflection and refraction of laser beam at tilted concave and convex elliptic paraboloid interfaces and studying laser beam reflection from a tilted concave parabola of revolution
Studying Gaussian beam is a method to investigate laser beam propagation and ABCD matrix is a fast and simple method to simulate Gaussian beam propagation in different mediums. Of the ABCD matrices studied so far, reflection and refraction matrices at various surfaces have attracted a lot of researches. However in previous work the incident beam and the principle axis of surface are in parallel...
متن کاملUsing of Broadened Asymmetric Waveguide Structure for 980nm Diode Laser
Laser diode beam divergence is the main parameter for beam shaping and fiber optic coupling. Increasing the waveguide layer thickness is the conventional method to decrease the beam divergence. In this paper, the broadened asymmetric waveguide is introduced to decrease the divergence without increasing the optical power. The asymmetric waveguide was used to shift the vertical optical field to n...
متن کاملThermal Analysis of Laser Hardening for Different Moving Patterns
Transient thermal field in laser surface hardening treatment of medium carbon steel was analyzed by employing both three-dimensional analytical model and finite element model. In finite element model the laser beam was considered as a moving plane heat flux to establish the temperature rise distribution in the work-piece, while in analytical model laser beam was considered as an internal heat s...
متن کاملInvestigation of Coherent and Incoherent Laser Beams Propagation Through Turbulent Atmosphere
In this paper propagation of combined laser beam through atmosphere is investigated. Laser beam is combined via lens array arrangement. Turbulence is considered as an affecting factor of atmosphere and its effects on transverse coherence length (Fried parameter), peak intensity, propagation efficiency, and spot size of the laser beam is investigated. Coherent and incoherent combined beam are co...
متن کامل