Freeze-Thaw Durability of Air-Entrained Concrete
نویسندگان
چکیده
One of the most damaging actions affecting concrete is the abrupt temperature change (freeze-thaw cycles). The types of deterioration of concrete structures by cyclic freeze-thaw can be largely classified into surface scaling (characterized by the weight loss) and internal crack growth (characterized by the loss of dynamic modulus of elasticity). The present study explored the durability of concrete made with air-entraining agent subjected to 0, 100, 200, 300, and 400 cycles of freeze-thaw. The experimental study of C20, C25, C30, C40, and C50 air-entrained concrete specimens was completed according to "the test method of long-term and durability on ordinary concrete" GB/T 50082-2009. The dynamic modulus of elasticity and weight loss of specimens were measured after different cycles of freeze-thaw. The influence of freeze-thaw cycles on the relative dynamic modulus of elasticity and weight loss was analyzed. The findings showed that the dynamic modulus of elasticity and weight decreased as the freeze-thaw cycles were repeated. They revealed that the C30, C40, and C50 air-entrained concrete was still durable after 300 cycles of freeze-thaw according to the experimental results.
منابع مشابه
The Effects of Concrete Pavement Mix Design Parameters on Durability under Freeze and Thaw Condition
This paper is based on an experimental research that examined the effects of concrete`s major parameters on durability of concrete pavements and curbs under freezing and thawing cycles. These parameters include concrete mix design parameters such as water-cement ratio, fine aggregate percentage and using air entraining admixture and simulating real freeze-thaw cycles that infrastructures underg...
متن کاملFreeze Thaw Durability of Internally Cured Concrete Made Using Superabsorbent Polymers
The use of superabsorbent polymers (SAPs) to produce internally cured concrete has been shown to be effective in reducing the potential for restrained shrinkage cracking of high performance concrete mixtures. However, not much is known regarding the freeze–thaw durability of concrete mixtures that incorporate SAPs for internal curing (IC). When SAP particles desorb (or partially desorb) the “wa...
متن کاملSaturation of Air Entrained Voids and Its Implication on the Transport of Ionic Species in Concrete
Air entrainment is commonly used to improve the durability of concrete materials exposed to freezing and thawing. While the influence of air voids on freeze/thaw damage and salt scaling is frequently studied, the influence of entrained air voids on ionic transport has been studied less frequently. Since ionic transport in concrete materials relies on pore fluid as the medium of conduction, only...
متن کاملEffect of Fast Freeze-Thaw Cycles on Mechanical Properties of Ordinary-Air-Entrained Concrete
Freezing-thawing resistance is a very significant characteristic for concrete in severe environment (such as cold region with the lowest temperature below 0°C). In this study, ordinary-air-entrained (O-A-E) concrete was produced in a laboratory environment; the compressive strength, cubic compressive strength of C50, C40, C30, C25, and C20 ordinary-air-entrained concrete, tensile strength, and ...
متن کاملThe Effect of Air Entraining Agents on Compressive Strength
Freeze-thaw cycles are one of the greatest threats to concrete durability. Lately, protection against this threat excites scientists’ attention. Air-entraining admixtures have been widely used to produce freeze-thaw resistant at concretes. The use of airentraining agents (AEAs) enhances not only freeze-thaw endurance but also the properties of fresh concrete such as segregation, bleeding and fl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
دوره 2013 شماره
صفحات -
تاریخ انتشار 2013