Tunable friction behavior of oriented carbon nanotube films
نویسندگان
چکیده
Measured friction coefficients of carbon nanotubes vary widely from l<0.1–l>1.0 [1–6], while theoretical studies suggest intrinsically high friction coefficients, approaching unity [7]. Here we report that measured friction coefficients of MWNT films are strong functions of surface chemistry and temperature, but are not dependent on the presence of water vapor. We hypothesize that the origin of the temperature dependence arises from the interaction of the surface chemical groups on the nanotubes [8–12] and rubbing counterface. The friction coefficient of individual films can be easily tuned by changing the surface temperature and chemistry of either the countersurface or the nanotubes, we have demonstrated the ability to create and control high and low friction pairs through plasma treatments of the nanotube films with argon, hydrogen, nitrogen, and oxygen. This behavior is completely reversible, and when coupled with the superior strength, thermal, and electrical properties of nanotubes, provides a versatile tunable, multifunctional tribological system.
منابع مشابه
Assembling of carbon nanotubes film responding to significant reduction wear and friction on steel surface
Friction properties of carbon nanotubes have been widely studied and reported, however, the friction properties of carbon nanotubes related on state of itself. It is showing superlubricity under nanoscale, but indicates high shear adhesion as aligned carbon nanotube film. However, friction properties under high load (which is commonly in industry) of carbon nanotube films are seldom reported. I...
متن کاملStress-strain Hysteresis of a Carbon Nanotube Network as Polymer Nanocomposite Filler under Cyclic Deformation
A network of entangled multiwall carbon nanotubes is an assembly of non-bonded and randomly oriented units whose mechanical behavior is affected by their buckling, compression and slippage at contact points. Slippage and irreversible nanotube rearrangements are evidenced by the hysteresis in the stress-strain curves during loading and unloading cycles. To model the mechanical behavior, a nonlin...
متن کاملLiquid-crystalline processing of highly oriented carbon nanotube arrays for thin-film transistors.
We introduce a simple solution-based method for the fabrication of highly oriented carbon nanotube (CNT) arrays to be used for thin-film transistors. We exploit the liquid-crystalline behavior of a CNT solution near the receding contact line during tilted-drop casting and produced long-range nematic-like ordering of carbon nanotube stripes caused by confined micropatterned geometry. We further ...
متن کاملFriction and adhesion properties of vertically aligned multi- walled carbon nanotube arrays and fluoro-nanodiamond films
Sliding friction and adhesion properties of vertically aligned multi-walled carbon nanotube (VAMWCNT) arrays and fluoro-nanodiamond (F-ND) films on glass substrate have been quantitatively investigated in current study using atomic force microscopy. It was found that VAMWCNT arrays result in lower friction compared to F-ND films. Friction forces were also found to be consistently higher in nitr...
متن کاملThe Effects of Carbon Nanotube Orientation and Aggregation on Static Behavior of Functionally Graded Nanocomposite Cylinders
In this paper, the effects of carbon nanotube (CNT) orientation and aggregation on the static behavior of functionally graded nanocomposite cylinders reinforced by CNTs are investigated based on a mesh-free method. The used nanocomposites are made of the straight CNTs that are embedded in an isotropic polymer as matrix. The straight CNTs are oriented, randomly or aligned or local aggregated int...
متن کامل