Change in Microstructure and Solubility Improvement of HAp Ceramics by Heat-Treatment in a Vacuum
نویسندگان
چکیده
1Department of Materials Science and Engineering, Graduate School of Engineering, Osaka University, Suita 565-0871, Japan 2Handai-Frontier Research Center, Graduate School of Engineering, Osaka University, Suita 565-0871, Japan 3Department of Restorative Dentistry and Endodontology, Graduate School of Dentistry, Osaka University, Suita 565-0781, Japan 4Department of Biomaterials Science, Hiroshima University Faculty of Density, Hiroshima 734-8553, Japan
منابع مشابه
Microstructure, mechanical and thermal properties of chalcogenide glasses and glass-ceramics based on Se-As-Ge system nucleated by Sn
In particular, chalcogenide glasses and glass-ceramics are new materials that exhibit good transparency in infrared region (0.8-12µm). We can overcome the main weakness of these glasses by improving the hardness through controlling crystallization. In this paper, we report results of a study on chalcogenide glasses in the ternary system of As-Se-Ge with nominal composition of Snx (Se...
متن کاملMicrostructure Evolution and Mechanical Properties Improvement in Liquid-Phase-Sintered Hydroxyapatite by Laser Sintering
CaO-Al₂O₃-SiO₂ (CAS) as a liquid phase was introduced into hydroxyapatite (HAp) to prepare bone scaffolds. The effects of the CAS content (1, 2, 3, 4 and 5 wt%) on microstructure and mechanical properties of HAp ceramics were investigated. The optimal compression strength, fracture toughness and Vickers hardness reached 22.22 MPa, 1.68 MPa·m1/2 and 4.47 GPa when 3 wt% CAS was added, which were ...
متن کاملNumerical Simulation Of Heat Affected Zone Microstructure During Laser Surface Melting
Microstructural changes during laser welding and laser surface treatment has been regarded by many researchers. Most researches have focused on studying the effect of various process parameters on the size and microstructure of the heat affected zone. But some studies show that the initial microstructure of the base metal can also affect the heat affected zone dimensions and final microstructur...
متن کاملCytocompatibility and Phase Assemblage Study of heat treated potassium magnesium phosphate–silicate ceramics
Statement of Purpose: This article will report the study on a new generation bioactive ceramic, based on MgKPO4 (Magnesium Potassium Phosphate, abbreviated as MKP) for biomedical applications. A series of heat treatment experiments on the slip cast silica (SiO2) containing MKP ceramics were carried out at 900, 1,000 and 1,100C for 4 h in air. The density of the slip cast ceramic increased to 2....
متن کاملTHE EFFECT OF RAW MATERIALS CONCENTRATION ON HYDROXYAPATITE POWDER CHARACTERISTICS AND SINTERING BEHAVLOR
Ultrafine hydroxyapatite (HAp) powders with crystallite size in the range of 10-90 nm were synthesized by chemical precipitation process using Ca(OH)2 and H3PO4 solutions as starting materials. Molar ratio of Ca/P=1.68 was kept constant throughout the process and alkaline condition for the reaction was maintained using ammonium hydroxide. The role of raw material concentration on HAp crystallit...
متن کامل