Heat Transfer from Two Cam Shaped Cylinders in Tandem Arrangement
ثبت نشده
چکیده
Abstract—Heat transfer from two cam shape cylinder in tandem arrangement had been studied numerically. The distance between the centers of cylinders (L) is allowed to vary to change the longitudinal pitch ratio (L/Deq). The equivalent diameter of the cylinder (Deq) is 27.6 mm and longitudinal pitch ratio varies in range 2<L/Deq<6. The Reynolds number based on equivalent circular cylinder are within 50< Reeq <300. Results show that Nusselt number of second cylinder increases about 5 to 33 times when longitudinal pitch ratio increases from 2 to 6.
منابع مشابه
Enhancement of Natural Convection Heat Transfer in Annular Enclosures
Natural convection heat transfer was investigated experimentally in a concentric-cylinders annulus. To enhance the rate of heat transfer, pin fins were installed on the surface of the inner cylinder. Two fin arrangements were employed, namely, staggered and in-line arrangements. The length of the fins varied from 2 to 8 cm and the Rayleigh number Ra changed in the range from 5 x 105 to 5 x 106...
متن کاملNumerical simulation of nanofluid flow over diamond-shaped elements in tandem in laminar and turbulent flow
In this paper, the Al2O3-water nanofluid flow in laminar and turbulent flows inside tubes fitted with diamond-shaped turbulators is numerically modeled. The nanofluid flow is modeled by employing a two-phase mixture method and applying the constant heat flux boundary condition at tube walls. In the results, the effects of different parameters such as the geometry of turbulators, volume fraction...
متن کاملNatural Convection Heat Transfer From Horizontal Cylinders in a Vertical Arra Confined Between Parallel Walls
Laminar natural convection from an array of horizontal isothermal cylinders confined between two vertical walls, at low Rayleigh numbers, is investigated by theoretical and numerical methods. The height of the walls is kept constant, however, number of the cylinders and their spacing, the distance between the walls and Rayleigh number have been varied. The optimal spacing (confining walls) and ...
متن کاملNatural convection from horizontal noncircular annulus partially filled with porous sleeve
In this paper natural convection heat transfer within a two-dimensional, horizontal, concentric cam shape cylinders that is partially filled with a fluid saturated porous medium has been investigated. both cylinder are kept at constant and uniform temperatures with the outer cylinder being subjected relatively lower than the inner one. In addition the forchheimer and brinkman effect are taken i...
متن کاملNumerical investigation on the effects of six control rods arranged in equilateral triangular configurations on fluid flow and forced convection heat transfer from a circular cylinder
The present work deals with heat transfer characteristics as well as fluid flow patterns in laminar flow regime for a circular cylinder with six control rods arranged in equilateral triangular geometries. The computations have been carried out by a finite volume approach using the overset grid method. The unsteady flow at Re= 200 and Pr= 0.7 and 7.0 was examined. The effect of the control rods ...
متن کامل