On the Loading of Power Modules in a Three Phase Voltage Source Converter
نویسندگان
چکیده
The loading of free wheel diodes (FWD) and IGBTs in the power modules of a Voltage Source Converter (VSC) are investigated. In converter duty, the FWD is utilized more then the IGBT. Presently, most FWD’s in power modules are optimized for inverter duty. This practice tends to undersize the FWD from a converter viewpoint. This design philosophy is examined in the paper. For this purpose, the original dynamic thermal model of IGBT and FWD were developed. Model parameters were identified from the manufacturers catalogue data. A mathematical model of the entire VSC was developed to compute current, voltage, power and thermal conditions for the power module and other components in converter operation.
منابع مشابه
Comparative Power Quality Analysis of Different DSTATCOM Topologies
This paper presents the three topologies of three-phase four-wire DSTATCOM for reduction of harmonics, reactive power compensation, increasing power factor, which occur due to a nonlinear load, environment problem and polluted grid. The performances of the above topologies have been compared for the magnitude of source current, power factor improvement, DC-link voltage regulation, and total har...
متن کاملMulti-Stage DC-AC Converter Based on new DC-DC converter for energy conversion
This paper proposes a multi-stage power generation system suitable for renewable energy sources, which is composed of a DC-DC power converter and a three-phase inverter. The DC-DC power converter is a boost converter to convert the output voltage of the DC source into two voltage sources. The DC-DC converter has two switches operates like a continuous conduction mode. The input current of DC-DC...
متن کاملDesign and Simulation of a New DC Power Supply Based on Dual Bridge Matrix Converter
A conventional high power DC power supply systems consist of a three-phase diode rectifier followed by a high frequency converter to supply loads at regulated DC voltage. These rectifiers draw significant harmonic currents from the utility, resulting in poor input power factor. In this paper, a DC power supply based on dual-bridge matrix converter (DBMC) with reduced number of switches is p...
متن کاملPumped Storage Power Plant Control System Modeling by Applying VSI and Vector control principle
This paper includes modeling and simulation of 180 MW units of pumped storage power plant with Variable speed machines. In this method, voltage source inverters are used instead of traditional cyclo-converters. This paper aims to control the voltage source inverters and maintain DC voltage at a constant value. AC/ DC/ AC converter is used in system configuration structure in order to control an...
متن کاملAnalysis of Switched Inductor Three-level DC/DC Converter
A non-isolated DC/DC converter with high transfer gain is proposed in this paper. The presented converter consists of the switched inductor and three-level converters. The DC/DC power converter is three-level boost converter to convert the output voltage of the DC source into two voltage sources. The main advantages of DC/DC converter are using low voltage semiconductors and high gain voltage. ...
متن کامل