Extraction - Spectrophotometric Determination of Nic and Palladium ( II ) with 0 , 0 p - Diethyldithiophosphate 1 kel ( II )
نویسندگان
چکیده
Nickel(II) of 0.04-1.4 mmol dm-3 and palladium(II) of 1-32 μmol dm-3 were extracted quantitatively into chloroform from the aqueous phases containing 0.2 mol dm-3 and 2 mmol dm-3 0,0'-diethyldithiophosphate(dtp-) at pH 1-7 and 1-13, and determined at 385 nm (c=8.4x 102 mol-' dm3 cm-') and 298 nm (e=2.9x 104 mol-' dm3 cm-'), respectively. The determination of nickel was affected with many diverse ions, but that of palladium was hardly affected with them except copper(II), tin(II), antimony(III), silver(I), mercury(II), gold(III), osmium(VIII), and nitrite ion by using 10 mmol dm-3 EDTA as a masking agent. The extracted species of nickel(II) and palladium(II) were [Ni(dtp)2] and [Pd(dtp)2], respectively. The stability and distribution constants for the nickel(II) complex were determined as 1.3x 10 (mol dm-3)-2 and 1.Ox 103, respectively. The palladium(II) complex was, however, too stable to determine the constants.
منابع مشابه
Extraction - Spectrophotometric Determination of Palladium with Tetrabutyl Ammonium Iodide
A sensitive and selective extraction - spectrophotometric method for the determination of trace amounts of palladium is reported. The method is based on quantitative extraction of brownish tetrabutylammoium tetraiodopalladium (II) ion pair into a small valume of chloroform at pH 1.3-12.0, followed by spectrophotometric measurements. The Beer's law is obeyed over the range 0.02-1.09 <em...
متن کاملUltra-trace Determination of Palladium(II) by Spectrophotometric Flow Injection Analysis
Nowadays, palladium compounds due to their especial characteristics used in different industries, mainly in electrical power sources and chemical productions as a catalyst. Therefore, Pd concentration is increasing in our around that can be contaminant our environment due its toxic effects. In this work, a simple, selective and rapid flow injection method of analysis (FIA) has been developed fo...
متن کاملExtraction of Traces of Copper as Tetra-Butylammonium Tetrathiocyanato Copper (II) and Its Spectrophotometric Determination Using Eriochrome Black T
An extraction-spectrophotometric method for the determination of traces of copper (II) is described. The method is based on the quantitative extraction of copper as tetrabutylammonium tetrathiocyanato copper (II) into methyl isobutyl ketone, followed by spectrophotometric determination, using eriochrome black T as a metallochromic indicator. The red-violet mixed complex of copper absorbs at...
متن کاملSolvent extraction, spectrophotometric determination of copper (II) from environmental samples using o-methylphenyl thiourea as a novel reagent
A simple and rapid method has been developed for solvent extraction and spectrophotometric determination of copper (II) using o-methylphenyl thiourea (OMPT) as a sensitive reagent. The basis of proposed method is formation of copper (II)-OMPT complex. Copper (II) was extracted with 0.020 mol L-1 OMPT in chloroform from aqueous solution in 0.075 mol L-1 potassium iodate. The absorbance of comple...
متن کاملTrace determination and separation of tin (II) by floatation-spectrophotometric using kalmagyte and CTAB
ABSTRACTA novel floatation-spectrophotometric extraction method was developed for the recovery of tin (II) from aqueous samples prior to determination by UV spectrophotometric detection. The method is based on the formation of a complex between tin (II) and kalmagyte in pH=8. The complex is floated in the interface of n-hexane and aqueous phases. After removing the aqueous phase, the floated pa...
متن کامل