Cracking condition of cohesionless porous materials in drying processes.

نویسنده

  • So Kitsunezaki
چکیده

The invasion of air into porous systems in drying processes is often localized in soft materials, such as colloidal suspensions and granular pastes, and it typically develops in the form of cracks before ordinary drying begins. To investigate such processes, we construct an invasion percolation model on a deformable lattice for cohesionless elastic systems, and with this model we derive the condition under which cracking occurs. A Griffith-like condition characterized by a dimensionless parameter is proposed, and its validity is checked numerically. This condition indicates that the ease with which cracking occurs increases as the particles composing the material become smaller, as the rigidity of the system increases and as the degree of heterogeneity characterizing the drying processes decreases.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Importance of the Factors Affecting Concrete Shrinkage

The loss of water from hardened concrete (stored in unsaturated air) causes drying shrinkage. Shrinkage of hardened concrete is influenced by various factors in a similar manner to creep under drying conditions. High cementitious materials content, particularly fine particles will reduce bleeding, but increase long term drying shrinkage. (The time of sawing the joints for induced cracking is no...

متن کامل

The Limiting Ideal Theory for Shear-index Cohesionless Granular Materials

To model cohesionless granular flow using continuum theory, the usual approach is to assume the cohesionless Coulomb-Mohr yield condition. However, this yield condition assumes that the angle of internal friction is constant, when according to experimental evidence for most powders the angle of internal friction is not constant along the yield locus, but decreases for decreasing normal stress c...

متن کامل

Simulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material

Drying represents one of the oldest unit operations employed in industrial processes. Drying is viewed as a process of simultaneous heat and mass transfer. Porous Clay-like material undergoes stresses due to non-uniform distribution of temperature and moisture induced by heat and mass transfer respectively. The aim of this work is to simulate the stresses induced by heat and mass transfer durin...

متن کامل

Freeze-drying of “pearl milk tea”: A general strategy for controllable synthesis of porous materials

Porous materials have been widely used in many fields, but the large-scale synthesis of materials with controlled pore sizes, pore volumes, and wall thicknesses remains a considerable challenge. Thus, the controllable synthesis of porous materials is of key general importance. Herein, we demonstrate the "pearl milk tea" freeze-drying method to form porous materials with controllable pore charac...

متن کامل

Eliminating cracking during drying.

When colloidal suspensions dry, stresses build up and cracks often occur -a phenomenon undesirable for important industries such as paint and ceramics. We demonstrate an effective method which can completely eliminate cracking during drying: by adding emulsion droplets into colloidal suspensions, we can systematically decrease the amount of cracking, and eliminate it completely above a critical...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical review. E, Statistical, nonlinear, and soft matter physics

دوره 87 5  شماره 

صفحات  -

تاریخ انتشار 2013