On the role of number of fixture, surgical technique and timing of loading
نویسنده
چکیده
On the role of number of fixtures, surgical technique and timing of loading 3 Abstract Aims: The aims of this thesis were to analyze reduced number of implants supporting full arch fixed mandibular prostheses and fixed partial dentures (FPDs), non-submerged healing and early loading in the edentulous mandible. A further aim was to evaluate fit of Computer Numerical Controlled (CNC) milled I-Bridge ® frameworks. Material & Methods: Paper I. One hundred and nineteen patients rehabilitated with full arch mandibular prostheses supported by four implants were evaluated after a mean follow-up of 4.4 years. Paper II. A total of 178 patients provided with FPDs supported by two (n=92) or three implants (n=122) of whom 123 were evaluated after a mean follow-up of 9.4 years. Paper III. Early and delayed loading of full arch mandibular prostheses were evaluated in 109 patients, 54 with delayed loading and 55 with early loading, with a mean follow-up of 3.6 years. Paper IV. Submerged and non-submerged implant placement for supporting fixed prostheses in the edentulous mandible were evaluated after five years in 29 patients. Paper V. The precision of fit of CNC-milled I-Bridge ® frameworks was evaluated using two different implant systems. Results: Paper I. The five-year cumulative survival rate (CSR) for implants was 99.1% and for prostheses 100%. Mean bone loss from baseline to five-year follow-up was 0.5 mm. No indication could be found that the number of supporting implants influenced the prosthetic complications. Paper II. The five-year implant and prosthesis CSR was 97.7% for two-implant supported FPDs and 97.3% for three-implant supported FPDs. Mean bone loss at five years was 0.4 mm. Significantly more prosthetic and abutment screw loosening were seen in two-implant supported FPDs. Paper III. Five-year CSR for implants was 94.4% and 92.5% for prostheses in early loading, and 97.9% and 98.0% in the delayed loading group. More prostheses needed adjustment or replacement in the early group, but patients treated with early loading were more pleased with the treatment procedure. Paper IV. Five-year CSR survival rate was 99.4%. Three implants fractured in one patient. Mean bone loss at five years was 0.7 mm in submerged implants and 0.5 mm in non-submerged implants. Paper V. All frameworks demonstrated clinically acceptable fit with mean distortion values within 23 μm (x-axis), 26 μm (y), 4 μm (z-axis) and 34 μm (3-D) for all frameworks. Control frameworks displayed greater levels of distortion than frameworks produced in …
منابع مشابه
Fixture Design Automation and Optimization Techniques: Review and Future Trends
Fixture design is crucial part of manufacturing process. Fixture design is a critical design activity process, in which automation plays an integral role in linking computer-aided design (CAD) and computer-aided manufacturing (CAD). This paper presents a literature review in computer aided fixture design (CAFD) in terms of automation and optimization techniques over the past decades. First, the...
متن کاملExtension of VIKOR Method to Find an Optimal Layout for Fixture's Supporting Points in Order to Reduce Work Piece Deformation
In automotive industry fixtures have a direct effect on product manufacturing quality, productivity and cost, as a result fixtures, particularly welding fixture, play a crucial role in the auto industry. The fixture is a special tool for holding a work piece in proper position during manufacturing operation, so in the phase of the fixture design process positioning pins and surfaces are used to...
متن کاملOptimisation of shock absorber process parameters using failure mode and effect analysis and genetic algorithm
The various process parameters affecting the quality characteristics of the shock absorber during the process were identified using the Ishikawa diagram and by failure mode and effect analysis. The identified process parameters are welding process parameters (squeeze, heat control, wheel speed, and air pressure), damper sealing process parameters (load, hydraulic pressure, air pressure, and ...
متن کاملبررسی زمانبندی و سطح فعالیت عضلات ستون فقرات کمری و کمربند لگنی به دنبال بارگذاری در حالت تعادلی استاتیک در وضعیت ایستاده بر روی سطوح اتکاء مختلف
Background: One of the most important concerns in orthopedic medicine is the low back. Considering the importance of muscle function in preventing LBT by controlling too much load and stress applied on the spinal joints and ligaments. Materials and Methods: The aim of this research was to determine the timing and level of activities of lumbopelvic muscles in response to postural perturbations c...
متن کاملExperimental Analysis of Crashworthiness Behavior of Energy Absorber Tubes Under 3D Oblique Load
Actual applications of the energy absorbers showed that actual loads are not applied in the form of pure axial compression, pure bending or pure torsion. In reality, an energy absorber component may be subjected to combined loading of compression, bending and torsion. A number of previous articles have investigated the behavior of energy absorbers under oblique loading. In such cases, the obliq...
متن کامل