Magnetic field behavior of YBCO step-edge Josephson junctions in rf-washer SQUIDs - Applied Superconductivity, IEEE Transactions on

نویسندگان

  • M. Bick
  • J. Schubert
  • M. Fardmanesh
  • G. Panaitov
  • M. Banzet
  • W. Zander
  • H.-J. Krause
چکیده

Abstruct-The suppression of the critical current in YBCO Josephson junctions by the Earth's magnetic field strongly affects the operation of SQUIDs outside magnetic shielding. Commonly, one observes a modulation of the SQUID fluxvoltage transfer function amplitude, Vsq.pp, with a period of AB,, leading to an increased white flux noise level or unstable SQUID operation. Here, we report on the investigation of AB,., of rf-SQUID sensors based on step edge junctions (SEJ) operated in a flip chip configuration with coplanar resonators with integrated flux concentrators. To investigate the origin of the suppression of Vsq-pp, we opened the SQUID loop of some samples and measured the magnetic field dependence of the critical current I,(B) directly and compared it to VSqJB). It is shown that a junction width in the submicrometer scale is required for operation of the sensors in the Earth's magnetic field.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Analysis of electrical characteristics and magnetic field dependences of YBCO step edge and bicrystal grain boundary junctions for rf-SQUID applications

The dc characteristics and magnetic field dependences of Y–Ba–Cu–O bicrystal grain boundary junctions (BGBJs) and step edge junctions (SEJs) were investigated for fabrication of rf-SQUIDs. Test junctions with up to 8 μm widths as well as the junctions of the two types of junction-based rf-SQUID were studied. The SEJs typically showed lower Jc and higher ρN as compared to the BGBJs, resulting in...

متن کامل

High-Tc SQUIDs on Silicon Substrates

We have developed high-?;. SQUIDs based on Josephson step-edge junctions on silicon substrates. The SQUIDs show a transfer function up to 150 pVIQ,, and a white noise of lV5 @JHz" at 50 K. During the last three years extensive investigations of the growth of YBCO, buffer and passivation layers as well as step-preparation and patterning processes were necessary to find a standard preparation pro...

متن کامل

High-Tc Superconducting Electronic Devices Based on YBCO Step-Edge Grain Boundary Junctions

We outline a number of high temperature superconducting Josephson junction-based devices including superconducting quantum interference devices (SQUIDs) developed for a wide range of applications including geophysical exploration, magnetic anomaly detection, terahertz (THz) imaging and microwave communications. All these devices are based on our patented technology for fabricating YBCO step-edg...

متن کامل

Junction Characteristics and Magnetic Field Dependencies of Low Noise Step Edge Junction Rf-SQUIDs for Unshielded Applications

Step edge grain boundary (GB) junctions and rfSQUIDs have been made using pulsed laser deposited Y-Ba-Cu-O films on crystalline LaAlO3 substrates. The steps were developed using various ion-beam etching processes resulting in sharp and ramp type step structures. Sharp step based GB junctions showed behavior of serial junctions with resistively shunted junction (RSJ)-like characteristics. The ra...

متن کامل

Magnetic Field Investigations of Small Sputtered Step-Edge Junctions

YBazCu,07 step-edge junctions are fabricated on SrTi03-substrates. The steps of 300nm height are milled by argon-ion-beam-etching (BE). The films are deposited by high-pressure on-axis magnetron sputter technique patterned to microbridges with widths down to 0.5pm by electron beam lithography and argon ion e t c h . For ratios of film tluckness to step height of t/h % the current-voltage charac...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004