Development Trend of the Compressive Strength of an In-Service Sidewall Corroded by Sulphate with a High Concentration of Ca2+
نویسندگان
چکیده
At the bedrock section of the auxiliary shaft of the Tong-ting coal mine, the sidewall has varying degradation degrees in different parts. The part on which water flowed is barely corroded, whereas the moist part near the pouring joints is seriously corroded. We first studied the mechanism of this phenomenon by chromatography, X-ray diffraction, and energy-dispersive X-ray spectroscopy. We then used simplified models built by particle flow code software (i.e., particle flow code in three dimensions, PFC3D) to analyse how increasing degradation depth affects compressive strength and failure patterns. The results were as follows. (1) Gypsum and calcite in corrosive water were supersaturated. The part on which water flowed was protected by the crystallized precipitation on the concrete. By contrast, the degradation of the part where water flowed through pouring joints was aggravated by internal crystallization and dissolution. (2) PFC3D numerical simulation indicated that decreases in vertical ultimate stress were strongly linearly correlated with degradation depth. As for the −355.5 m damaged part, reinforcement should be conducted before degradation depth reaches 250 mm. (3) No obvious signs were observed prior to the failure of the corroded sidewall. Therefore, the development of degradation depth should be monitored before degradation parts are reinforced.
منابع مشابه
Prediction of Lightweight Aggregate Concrete Compressive Strength
Nowadays, the better performance of lightweight structures during earthquake has resulted in using lightweight concrete more than ever. However, determining the compressive strength of concrete used in these structures during their service through a none-destructive test is a popular and useful method. One of the main methods of non-destructive testing in the assessment of compressive strength...
متن کاملTHE EFFECT OF NANO BIOGLASS ON THE FABRICATION OF POROUS TITANIUM SCAFFOLDS
In this study, porous titanium composites containing 5, 10 and 15 wt. % nanobioglass were fabricated by space holder sintering process. The pore morphology and phase constituents of the porous samples were characterized by X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The mechanical properties were determined by compression test. The porosity of the sintered samples show...
متن کاملExperimental Study of Mechanical Stabilization impact on Improving Compressive, Tensile and Flexural Strength of Adobe
Iran is one of the oldest countries in the world benefiting from adobe-based architecture; a method which has long been forgotten in the contemporary architecture of country. Considering the important role of Earth Blocks such as adobe in the world’s contemporary architecture and the wealth of Iranian adobe-based monuments, it is necessary to continue contemplating on ways to optimize adobe to ...
متن کاملEffect of freeze-thaw cycle on strength and rock strength parameters (A Lushan sandstone case study)
In an era of continued economic development around the globe, numerous rock-related projects including mining and gas/oil exploration are undertaken in regions with cold climates. Winters in the Iranian western and northwestern provinces are characterized by a high precipitation rate and a cold weather. Under such conditions, rocks are exposed to long freezing periods and several freeze-thaw (F...
متن کاملPREDICTION OF COMPRESSIVE STRENGTH AND DURABILITY OF HIGH PERFORMANCE CONCRETE BY ARTIFICIAL NEURAL NETWORKS
Neural networks have recently been widely used to model some of the human activities in many areas of civil engineering applications. In the present paper, artificial neural networks (ANN) for predicting compressive strength of cubes and durability of concrete containing metakaolin with fly ash and silica fume with fly ash are developed at the age of 3, 7, 28, 56 and 90 days. For building these...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016