Comparing Structural Identification Methodologies for Fatigue Life Prediction of a Highway Bridge
نویسندگان
چکیده
Applied Computing and Mechanics Laboratory (IMAC), School of Architecture, Civil and Environmental Engineering (ENAC), Swiss Federal Institute of Technology (EPFL), Lausanne, Switzerland, ETH Zurich, Future Cities Laboratory, Singapore, Singapore, Resilient Steel Structures Laboratory (RESSLAB), School of Architecture, Civil and Environmental Engineering (ENAC), Swiss Federal Institute of Technology (EPFL), Lausanne, Switzerland
منابع مشابه
Determination of Asphalt Binder VECD Parameters Using an Accelerated Testing Procedure
Fatigue characteristics of asphalt binder have an important role in asphalt mix resistance against cracking. Viscoelastic Continuum Damage (VECD) analysis of asphalt binders has been successfully used in highway research works in order to predict fatigue behavior of hot mix asphalt (HMA). In this method an intrinsic property of the material, called damage function is obtained which is independe...
متن کاملFatigue Life Prediction of Rivet Joints
Strength reduction in structures like an aircraft could be resulted as cyclic loads over a period of time and is an important factor for structural life prediction. Service loads are emphasized at the regions of stress concentration, mostly at the connection of components. The initial flaw prompting the service life was expected by using the Equivalent Initial Flaw Size (EIFS) which has been re...
متن کاملSHM-Based Probabilistic Fatigue Life Prediction for Bridges Based on FE Model Updating
Fatigue life prediction for a bridge should be based on the current condition of the bridge, and various sources of uncertainty, such as material properties, anticipated vehicle loads and environmental conditions, make the prediction very challenging. This paper presents a new approach for probabilistic fatigue life prediction for bridges using finite element (FE) model updating based on struct...
متن کاملLow Cycle Fatigue Simulation of Valve Bridge Region in Cylinder Head Based on Critical Plane Model
The reason of this study is low cycle failure of cast iron cylinder head during the E5 standard durability test. The goal of the present investigation is durability test simulation and low cycle fatigue life evaluation of cast iron cylinder head. With uncouple structural analysis, preloads, thermal and mechanical load and boundary conditions are prescribed to finite element model of the cylinde...
متن کاملA methodology for Determining the Seismic Vulnerability of Old Concrete Highway Bridges by Using Fragility Curves
Past earthquakes have demonstrated that old RC bridges may be seismically vulnerable. Bridge responses during the last decades illustrated the necessity of the seismic assessment of bridges especially those which were designed with old codes. In this research an existing concrete bridge representative of the most common bridges in the highway system in Iran are studied. Push over and nonlinear ...
متن کامل