Mechanical Property and Strain Transferring Mechanism in Optical Fiber Sensors
نویسندگان
چکیده
منابع مشابه
Weight Measurements by Using Simple Optical-Fiber Sensors (RESEARCH NOTE)
The use of different optical-fiber sensors for weighing measurements is Abstract described. By using three different mechanical stressing mechanisms, the operation of the fiber-to-fiber transducer systems are tested and the results are presented. Parameters such as sensitivity, hysteresis, resolution, and dynamic range are measured. A comparison of the results has shown that the sensor system m...
متن کاملحسگرهای فوق حساس تار نوری بر اساس تشدید پلاسمون سطحی نانوذرات طلا
Plasmonic properties of metals such as gold is the main factor in the development of optical fiber sensors. Plasmonic property is created by exciting the surface plasmon polaritons by laser radiation. These properties are usually used in boosting and detection. The article examines and compares the collected information such as the length of the fiber optical sensor and the sensitivity of senso...
متن کاملDistributed Long-Gauge Optical Fiber Sensors Based Self-Sensing FRP Bar for Concrete Structure
Brillouin scattering-based distributed optical fiber (OF) sensing technique presents advantages for concrete structure monitoring. However, the existence of spatial resolution greatly decreases strain measurement accuracy especially around cracks. Meanwhile, the brittle feature of OF also hinders its further application. In this paper, the distributed OF sensor was firstly proposed as long-gaug...
متن کاملAnalysis of the Strain Transfer Mechanism between a Truly Distributed Optical Fiber Sensor and the Surrounding Medium
Distributed Optical Fiber Sensors (DOFS) are a key tool for monitoring health of large structures. An optoelectronic device, paired with an optical fiber in a cable, provides strain profiles over several kilometers with few micro-strains accuracy. However, due to shear deformation of the cable’s protective coating, strain measurements provided by DOFS may differ from actual strains in the embed...
متن کاملStrain Measurement of Carbon Composites Using Advanced Sensor Technology
This paper reports the sensor integration method into carbon composites for the development of Structural Health Monitoring (SHM). Early detection and long term monitoring of the specific properties of composites will improve the security and prolong the time of service 1 . The core function of SHM is the damage detection and identification at elevated temperatures, over loads and corrosion. Va...
متن کامل