Model based Controller Design for Level Process
نویسندگان
چکیده
Control of process parameters are important in the chemical process industries. Proportional, integral and derivative controller is the most commonly used to form a closed loop system for the effective control of process parameter. In this paper, a liquid level in the cylindrical tank is to be controlled at setpoint value. At first, The model for such a real time process is identified and validated. To obtain the effective controller parameters settings, a conventional PID control model based PID were analyzed and the efficiency of the model based PID controller is highlighted with aid of time domain analysis. The ability of the designed model based controller in terms of tracking set point is also compared and simulation results are shown. General Terms Control System
منابع مشابه
An ANOVA Based Analytical Dynamic Matrix Controller Tuning Procedure for FOPDT Models
Dynamic Matrix Control (DMC) is a widely used model predictive controller (MPC) in industrial plants. The successful implementation of DMC in practical applications requires a proper tuning of the controller. The available tuning procedures are mainly based on experience and empirical results. This paper develops an analytical tool for DMC tuning. It is based on the application of Analysis of V...
متن کاملDesign and implementation of a model predictive controller for the COVID-19 spread restraint in Iran
In this paper, a model is proposed based on the different levels of social restrictions for the COVID-19 spread restraint in Iran. Also, a Genetic Algorithm (GA) identifies parameters of model using reported main data from the Iranian Ministry of Health and simulated data based on proposed model. Whereas Model Predictive Control (MPC) is a popular method which has been widely used in process ...
متن کاملDecentralized Advanced Model Predictive Controller of Fluidized-Bed for Polymerization Process
The control of fluidized-bed operations processes is still one of the major areas of research due to the complexity of the process and the inherent nonlinearity and varying dynamics involved in its operation. There are varieties of problems in chemical engineering that can be formulated as NonLinear Programming (NLPs). The quality of the developed solution significantly affects the performa...
متن کاملModeling and Control of Water Level in Boiler Drum for Nassiriyah Thermal Power Plant
The boiler drum process is a nonlinear, complex and multivariable process which includes significant time delay. Therefore, the control on the water level in the drum is not easy and ideal. The first objective of this paper is to model the drum water level referring to 210 MW power unit for Nassiriyah thermal power plant. The second objective is to study the water level controller operation wit...
متن کاملRobust Controller Design Based-on Aerodynamic Load Simulator Identification Driven by PMSM for Hardware-in-the-Loop Simulations
Aerodynamic load simulators generate the required time varying load to test the actuator’s performance in the laboratory. Electric Load Simulator (ELS) as one of variety of the dynamic load simulators should follows the rotation of the Under Test Actuator (UTA) and applies the desired torque to UTA’s rotor at the same time. In such a situation, a very large torque is imposed to the ELS from the...
متن کاملModel Predictive Controller Design for a Novel Moving Mass Controlled Bi-rotor UAV
This paper presents design and implementation of Model Based Predictive Controller (MPC) for a novel Bi-Rotor Moving Mass Controlled (MMC) Unmanned Aerial Vehicle (UAV). Due to the strict constrained control inputs in this type of UAV, it is necessary to take into account the constrained controller design and un-constrained control methods are not applicable. MPC controller which is designed ba...
متن کامل