Control of dark current in photoelectrochemical (TiO<sub>2</sub>/I<sup>−</sup>–I<sub>3</sub><sup>−</sup>) and dye-sensitized solar cells

نویسندگان

  • Seigo Ito
  • Paul Liska
  • Pascal Comte
  • Raphaël Charvet
  • Peter Péchy
  • Udo Bach
  • Lukas Schmidt-Mende
  • Shaik Mohammed Zakeeruddin
  • Andreas Kay
  • Mohammad K. Nazeeruddin
  • Michael Grätzel
چکیده

The ruthenium complex bis-tetrabutylammonium cis-dithiocyanato-N,N9-bis-2,29-bipyridine-4-carboxylic acid, 49-carboxylate ruthenium(II), N-719, was found to block the dark current of dye sensitized solar cells (DSC), based on mesoporous TiO2 films deposited on a F-doped tin oxide electrode and the effect was compared to surface treatment by TiCl4 and the introduction of a compact TiO2 blocking layer.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The investigation on different light harvesting layers and their sufficient effect on the photovoltaic characteristics in dye sensitized solar cell

Titanium dioxide-based nanofibers (TiO2 nanofiber) were prepared by an electrospinning technique. The electrospun composite fibers were synthesized at different concentrations of titanium isopropoxide (25.35, 50.69, 76.05 wt%) and calcinated at different temperatures (450 oC, 650 oC and 850 oC) for 2 h. The diameters of nanofibers decreased by increas...

متن کامل

High Efficient Transparent TiO2 Nanotube Dye-Sensitized Solar Cells: Adhesion of TiO2 Nanotube Membrane to FTO by Two Different Methods

In order to fabricate transparent TiO2 nanotube dye-sensitized solar cells, anodically growth nanotube membranes are detached from Ti substrate by a re-anodization method. The membranes are transferred on FTO glass by two different methods. At the first one, 100mM Ti-isopropoxide is used to make TiO2 nanoparticles for adhering TiO2 nanotube membranes to FTO and ...

متن کامل

Fabrication, and Effect of Reflux time on Structural Properties of Pure and Al-Doped TiO2 Nano-rod

TiO2 nanorods can be used as dye-sensitized solar cells and as various sensors and photocatalysts. These nanorods are synthesized by a using thermal corrosion process in a NaOH solution at 200 oC with TiO2 powder as a source material. In the present work, the synthesis of TiO2 nanorods in anatase, rutile and Ti8O15 phases and the...

متن کامل

Synthesis and Investigation of Photovoltaic Properties of New Organic Dye in Solar Cells Device

In this paper, we designed and synthesized free-metal dyes based on indoline. The proposed dyes were synthesized from phenothiazine as the starting material by standard reactions. The chemical structure of the synthesized dye was confirmed using FT-IR, 1HNMR and DSC techniques. Spectrophotometric measurements of the organic dyes in acetonitrile and on a TiO2 substrate ...

متن کامل

Effect of Hydroquinone Dderivatives in Electrolytes on Dye-Sensitized Solar Cell Performance

New kinds of hydroquinone derivatives were synthesized and along with a azo dye applied as additives in the iodide/iodine redox electrolyte for dye-sensitized solar cells and their effect on the short-circuit photocurrent of dye sensitized solar cells was investigated. Addition of 0.05 M a hydroquinone derivative in the electrolyte comprising 0.5 M 1-methyl-3-propylimidazolium iodide (MPII) and...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005