Ultraslow growth rates of giant gypsum crystals.
نویسندگان
چکیده
Mineralogical processes taking place close to equilibrium, or with very slow kinetics, are difficult to quantify precisely. The determination of ultraslow dissolution/precipitation rates would reveal characteristic timing associated with these processes that are important at geological scale. We have designed an advanced high-resolution white-beam phase-shift interferometry microscope to measure growth rates of crystals at very low supersaturation values. To test this technique, we have selected the giant gypsum crystals of Naica ore mines in Chihuahua, Mexico, a challenging subject in mineral formation. They are thought to form by a self-feeding mechanism driven by solution-mediated anhydrite-gypsum phase transition, and therefore they must be the result of an extremely slow crystallization process close to equilibrium. To calculate the formation time of these crystals we have measured the growth rates of the {010} face of gypsum growing from current Naica waters at different temperatures. The slowest measurable growth rate was found at 55 °C, 1.4 ± 0.2 × 10(-5) nm/s, the slowest directly measured normal growth rate for any crystal growth process. At higher temperatures, growth rates increase exponentially because of decreasing gypsum solubility and higher kinetic coefficient. At 50 °C neither growth nor dissolution was observed indicating that growth of giant crystals of gypsum occurred at Naica between 58 °C (gypsum/anhydrite transition temperature) and the current temperature of Naica waters, confirming formation temperatures determined from fluid inclusion studies. Our results demonstrate the usefulness of applying advanced optical techniques in laboratory experiments to gain a better understanding of crystal growth processes occurring at a geological timescale.
منابع مشابه
Investigation of Parameters Affecting Gypsum Dewatering Properties in a Wet Flue Gas Desulphurization Pilot Plant
Wet flue gas desulphurization (FGD) plants with forced oxidation, installed at coal and oil fired power plants for removal of SO2(g), must produce gypsum of high quality. However, quality issues such as an excessive moisture content, due to poor gypsum dewatering properties, may occur from time to time. In this work, the particle size distribution, morphology, and filtration rate of wet FGD gyp...
متن کاملپیدایش و میکرومورفولوژی تحول گچ در خاکهای لسی شمال ایران
Gypsum is the most common sulfate mineral in soils of arid and semi-arid regions. Two hundred million hectares of the earth’s surface and about 28 million hectares of Iranian arid soils are covered by gypsiferous soils. The studied soils consist of alluvial plane and eolian plains in northern Iran. Soils were classified as Haplocambids, Aquisalids and Endoaquepts. In this study, genesis, format...
متن کاملکاربرد تحلیلهای بلورشناسی در مطالعات فنی آثار تاریخی گچی (مطالعهی موردی گچ بری کوه خواجهی سیستان، ملات گچ شادیاخ نیشابور و ملات گچ قلعه الموت قزوین)
Investigation of gypsum-based historical materials has two main problems: philological problems and technical issues. Technical issues, the main topic of this article, are normally consequences of physicochemical complexity of gypsum crystals in different conditions and variety of additives or mixed materials. Neglecting this technical problem, leads researchers to misunderstand or misinterpret...
متن کاملنحوه تشکیل و میکرومورفولوژی اریدیسولهال گچی و نمکی منطقه نوق رفسنجان در ارتباط با سطوح ژئومورفولوژی
Gypsiferous Aridisols are of great importance and extent in arid and semi-arid environments. There is a close relationship between soil genesis and landscape positions. This study aimed to determine the genesis and classification of gypsiferous soils and to investigate the relationship between micro-and macro-morphology of gypsum crystals and geomorphic positions in Rafsanjan area. The study ar...
متن کاملDistinguishing Anhydrate and Gypsum Scale in Mixing Incompatible Surface and Ground Waters During Water Injection Process
Determination of the type of precipitated calcium sulfate in mixing two incompatible injection and formation waters was studied experimentally in this work at two temperatures of 26oC and 80oC. Here the SEM, EDX and XRD techniques have been used to inspect the temperature effects on the morphology, type, and size of the precipitated calcium sulfate crystals. The result...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Proceedings of the National Academy of Sciences of the United States of America
دوره 108 38 شماره
صفحات -
تاریخ انتشار 2011