Torsional Model And Analytical Simulation For Complex Rotating Machines

نویسنده

  • Amin Almasi
چکیده

Complex rotating machine trains especially trains including electric machines are subject to the most varied and often most severe torsional disturbances. If shaft or rotating component failures occur as a result of torsional oscillations, the consequences can be catastrophic. In this paper a comprehensive model and simulation method using analytical formulations are developed to study both steady state and transient response of complex rotating machine trains including several machines. Analytical results are presented and recommendations for torsional reliable trains are addressed. Couplings being the more accessible components within the train are often modified to tune the overall system. Recommendations for coupling are: High torsional stiffness coupling (best and optimum option, if torsional simulation confirmed frequency separation and transient torques) or flexible coupling (more elasticity and damping and more maintenance) or integral rigid forged flange connection (more rigidity, high natural frequencies and much less damping).

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Advanced Torsional Study Method and Coupling Selection for Reciprocating Machines

Trains including reciprocating machines are subject to the most varied and often most severe torsional disturbances in comparison to other machinery classes. If crankshaft or rotating component failures occur as a result of shaft torsional oscillations, the consequences can be catastrophic. In this paper a new comprehensive model and solution method using analytical formulations are developed t...

متن کامل

Thermal Analysis of Laser Hardening for Different Moving Patterns

Transient thermal field in laser surface hardening treatment of medium carbon steel was analyzed by employing both three-dimensional analytical model and finite element model. In finite element model the laser beam was considered as a moving plane heat flux to establish the temperature rise distribution in the work-piece, while in analytical model laser beam was considered as an internal heat s...

متن کامل

Rotor Crack Detection Approach Using Controlled Shaft Deflection

Rotating shafts are important and responsible components of many machines, such as power generation plants, aircraft engines, machine tool spindles, etc. A transverse shaft crack can occur due to cyclic loading, creep, stress corrosion, and other mechanisms to which rotating machines are subjected. If not detected early, the developing shaft crack can lead to a serious machine damage resulting ...

متن کامل

Development of a novel method in TRMC for a Binary Gas Flow Inside a Rotating Cylinder

A new approach to calculate the axially symmetric binary gas flow is proposed Dalton’s law for partial pressures contributed by each species of a binary gas mixture (argon and helium) is incorporated into numerical simulation of rarefied axially symmetric flow inside a rotating cylinder using the time relaxed Monte-Carlo (TRMC) scheme and the direct simulation Monte-Carlo (DSMC) method. The res...

متن کامل

Power Electronic Devices for Damping Torsional Vibrations

Torsional vibrations and resonance problems with synchronous machines are most frequently encountered in rotor systems with long shafts and large inertias constituting a weakly damped mechanical resonator which exhibits a low resonance frequency. It is impossible to obtain a effective mechanical damping for these torsional vibrations, but by using a power electronics device and an inductive or ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009