Low temperature glycerol steam reforming on 1 bimetallic PtSn / C catalysts : on the effect of the Sn 2 content 3
نویسنده
چکیده
Steam reforming of glycerol to produce syngas or H2-enriched streams is a 12 promising route that has caught the attention of many researchers around the world. This reaction 13 is typically carried out over metal-based catalysts supported on stable materials. Herein we report 14 a study on the effect of Sn on the catalytic properties of Pt/C in the aforementioned reaction. A 15 series of Pt-Sn/C catalysts with different Pt:Sn ratios were prepared and characterized using ICP, 16 H2-TPR, TEM and XPS techniques, and they were tested in the glycerol steam reforming 17 *Manuscript Click here to view linked References
منابع مشابه
Bimetallic PtSn/C catalysts obtained via SOMC/M for glycerol steam reforming.
A detailed study on the preparation of bimetallic PtSn/C catalysts using surface-controlled synthesis methods, and on their catalytic performance in the glycerol steam reforming reaction has been carried out. In order to obtain these well-defined bimetallic phases, techniques derived from Surface Organometallic Chemistry on Metals (SOMC/M) were used. The preparation process involved the reactio...
متن کاملDehydrogenation of Isobutane Over Nanoparticles of Pt/Sn Alloy on Pt/Sn/Na-Y Catalyst: The Effect of Tin Precursor on the Catalyst Behavior
In this research Na-Y was synthesized by hydrothermal method and used as support for preparation of Sn/Pt/Na-Y catalysts using two different tin precursors, Bu3Sn(Cl) and SnCl2.2H2O, by sequential impregnation, in which the Pt was deposited first and in the next step Sn was deposited. The catalysts were characterized by H2 chemisorption, transmis...
متن کاملNi-Based Catalysts for Low Temperature Methane Steam Reforming: Recent Results on Ni-Au and Comparison with Other Bi-Metallic Systems
Steam reforming of light hydrocarbons provides a promising method for hydrogen production. Ni-based catalysts are so far the best and the most commonly used catalysts for steam reforming because of their acceptably high activity and significantly lower cost in comparison with alternative precious metal-based catalysts. However, nickel catalysts are susceptible to deactivation from the depositio...
متن کاملAn Investigation into the Effect of Hydrotalcite Calcination Temperature on the Catalytic Performance of Mesoporous Ni-MgO-Al2O3 Catalyst in the Combined Steam and Dry Reforming of Methane
Several mesoporous nickel-based catalysts with MgO-Al2O3 as the catalyst support were prepared using a co-precipitation method at a constant pH. The supports were prepared from the decomposition of an Mg-Al hydrotalcite-like structure which had already been prepared with Mg/Al=1. Prior to impregnating 10 wt.% nickel on the supports, the precursor was decomposed at several ...
متن کاملMethanol Steam Reforming Catalyzing over Cu/Zn/Fe Mixed Oxide Catalysts
Methanol steam reforming plays a pivotal role to produce hydrogen for fuel cell systems in a low temperature range. To accomplish higher methanol conversion and lower CO production, the reaction was catalyzed by CuZnFe mixed oxides. Various ratios of Fe and Cu/Zn were coprecipitated in differential method to optimize the CuZnFe structure. The sample containing 45Cu50Zn5Fe (Wt. %) revealed its m...
متن کامل