Electron bunch energy and phase feed-forward stabilization system for the Mark V RF-linac free-electron laser.
نویسندگان
چکیده
An amplitude and phase compensation system has been developed and tested at the University of Hawai'i for the optimization of the RF drive system to the Mark V free-electron laser. Temporal uniformity of the RF drive is essential to the generation of an electron beam suitable for optimal free-electron laser performance and the operation of an inverse Compton scattering x-ray source. The design of the RF measurement and compensation system is described in detail and the results of RF phase compensation are presented. Performance of the free-electron laser was evaluated by comparing the measured effects of phase compensation with the results of a computer simulation. Finally, preliminary results are presented for the effects of amplitude compensation on the performance of the complete system.
منابع مشابه
Energy stabilization of 1.5 GeV S-Band linac
KEK-ATF is studying low emittance, multi-bunch electron beam for the future linear collider. The energy instability of the 1.5 GeV linac has been a problem making the beam injection to the damping ring unstable. Because the unstable beam generates also large amount of the radiation, the beam current is limited by the KEK radiation safety policy much lower than what we expect. Stabilizing the S-...
متن کاملBeam Based Monitoring of the Rf Photo Gun Stability at Pitz
The stability of the photo injector is a key issue for the successful operation of linac based free electron lasers. Several types of jitter can impact the stability of a laser driven RF gun. Fluctuations of the RF launch phase and the cathode laser energy have significant influence on the performance of a high brightness electron source. Bunch charge measurements are used to monitor the stabil...
متن کاملCommissioning Results of the Lcls Injector*
The Linac Coherent Light Source (LCLS) is a SASE xray Free-Electron Laser (FEL) project presently under construction at SLAC [1]. The injector section, from drive-laser and RF photocathode gun through first bunch compressor chicane, was installed in fall 2006. Initial system commissioning with an electron beam has recently been completed. The second phase of construction, including second bunch...
متن کاملEnergy-Recovery Option for a Future X-ray Free-Electron Laser
A superconducting electron linac together with an energy-recovery system, which has been demonstrated as a useful driver for high-power IR-FELs, seems to be an attractive device for a future X-ray FEL facility as well, because the energy-recovery enable one to reduce the RF generator power required for the operation and also reduce the radiation from the beam dump. Automatic cancellation of bea...
متن کاملMeasured Properties of the DUVFEL High Brightness, Ultrashort Electron Beam
The DUVFEL electron linac is designed to produce sub-picosecond, high brighness electron bunches to drive an ultraviolet FEL. The accelerator consists of a 1.6 cell S-band photoinjector, variable pulse length Ti:Sapp laser, 4 SLAC-type S-band accelerating sections, and 4-dipole chicane bunch compressor. In preparation for FEL operation, the compressed electron beam has been fully characterized....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The Review of scientific instruments
دوره 84 6 شماره
صفحات -
تاریخ انتشار 2013