Synthesis and photoelectrochemical response of CdS quantum dot-sensitized TiO2 nanorod array photoelectrodes
نویسندگان
چکیده
A continuous and compact CdS quantum dot-sensitive layer was synthesized on TiO2 nanorods by successive ionic layer adsorption and reaction (SILAR) and subsequent thermal annealing. The thickness of the CdS quantum dot layer was tuned by SILAR cycles, which was found to be closely related to light absorption and carrier transformation. The CdS quantum dot-sensitized TiO2 nanorod array photoelectrodes were characterized by scanning electron microscopy, X-ray diffraction, ultraviolet-visible absorption spectroscopy, and photoelectrochemical property measurement. The optimum sample was fabricated by SILAR in 70 cycles and then annealed at 400°C for 1 h in air atmosphere. A TiO2/CdS core-shell structure was formed with a diameter of 35 nm, which presented an improvement in light harvesting. Finally, a saturated photocurrent of 3.6 mA/cm2 was produced under the irradiation of AM1.5G simulated sunlight at 100 mW/cm2. In particular, the saturated current density maintained a fixed value of approximately 3 mA/cm2 without decadence as time passed under the light conditions, indicating the steady photoelectronic property of the photoanode.
منابع مشابه
CuInS2 quantum dot-sensitized TiO2 nanorod array photoelectrodes: synthesis and performance optimization
CuInS2 quantum dots (QDs) were deposited onto TiO2 nanorod arrays for different cycles by using successive ionic layer adsorption and reaction (SILAR) method. The effect of SILAR cycles on the light absorption and photoelectrochemical properties of the sensitized photoelectrodes was studied. With optimization of CuInS2 SILAR cycles and introduction of In2S3 buffer layer, quantum dot-sensitized ...
متن کاملAu nanoparticle electrocatalysis in a photoelectrochemical solar cell using CdS quantum dot-sensitized TiO2 photoelectrodes.
A significant Au particle size-dependent electrocatalytic effect has been shown in a sandwich type photoelectrochemical solar cell consisting of CdS quantum dot (QD)-sensitized TiO(2) photoelectrodes, Au nanoparticle (NP)-loaded SnO(2) counter electrodes, and a polysulfide electrolyte solution intervening between the electrodes.
متن کاملCdS quantum dot-sensitized solar cells based on nano-branched TiO2 arrays
Nano-branched rutile TiO2 nanorod arrays were grown on F:SnO2 conductive glass (FTO) by a facile, two-step wet chemical synthesis process at low temperature. The length of the nanobranches was tailored by controlling the growth time, after which CdS quantum dots were deposited on the nano-branched TiO2 arrays using the successive ionic layer adsorption and reaction method to make a photoanode f...
متن کاملEnhancing Performance of CdS Quantum Dot-Sensitized Solar Cells by Two-Dimensional g-C3N4 Modified TiO2 Nanorods
In present work, two-dimensional g-C3N4 was used to modify TiO2 nanorod array photoanodes for CdS quantum dot-sensitized solar cells (QDSSCs), and the improved cell performances were reported. Single crystal TiO2 nanorods are prepared by hydrothermal method on transparent conductive glass and spin-coated with g-C3N4. CdS quantum dots were deposited on the g-C3N4 modified TiO2 photoanodes via su...
متن کاملPhotoelectrochemical Performance of Quantum dot-Sensitized TiO2 Nanotube Arrays: a Study of Surface Modification by Atomic Layer Deposition Coating
Although CdS and PbS quantum dot-sensitized TiO2 nanotube arrays (TNTAs/QDs) show photocatalytic activity in the visible-light region, the low internal quantum efficiency and the slow interfacial hole transfer rate limit their applications. This work modified the surface of the TNTAs/QDs photoelectrodes with metal-oxide overlayers by atomic layer deposition (ALD), such as coating Al2O3, TiO2, a...
متن کامل