Modeling and Parameter Extraction Technique for Uni-Directional HV MOS Devices
نویسندگان
چکیده
This paper presents a new technique for accurately modeling uni-directional High-Voltage lightly-doped-drain MOS (HV MOS) devices by extending the bi-directional HV MOS model and adopting a new parameter extraction method. We have already reported on a SPICE model for bi-directional HV MOS devices based on BSIM3v3. However, if we apply this bi-directional HV MOS model and its parameter extraction technique directly to uni-directional HV MOS devices, there are large discrepancies between the measured and simulated IV characteristics of the uni-directional devices. This paper extends the bi-directional HV MOS model, and adopts a new parameter extraction technique. Using parameters extracted with the new method, the simulated I-V characteristics of the unidirectional n-channel HV MOS device match the measured results well. Since our method does not change any model equations of BSIM3v3, it can be applied to any SPICE simulator on which the BSIM3v3 model runs. key words: high-voltage MOS, BSIM3, SPICE model
منابع مشابه
Modeling and Parameter Extraction Technique for HV MOS Devices with BSIM3v3
We have developed several kinds of HV MOS devices whose device structures and doping levels in the offset regions differ depending on the specifications of the devices. We have developed the bi-directional HV MOS device (e.g., it can be used as a bi-directional MOS switch) with both drain and source offset regions, and we previously described its SPICE model [4] – [5] based on BSIM3v3 [1] – [3]...
متن کاملCMOS Technology Characterisation for analog/RF application
We discuss state of the art and new developments for the characterization of CMOS technologies. In the first chapter the most important issues of MOS transistor modeling will be shown. Topics like AC/DC modeling, noise modeling and temperature modeling for the MOS transistor will be explained. State of the art MOS transistor models like the BSIM3 and BSIM4 models as well as the newest surface p...
متن کاملA Unified Environment for the Modeling of Ultra Deep Submicron MOS Transistors
This paper discusses the aspects of modern MOS modeling requirements. Starting from the fact, that even the Compact Model Council (CMC) outlined BSIM3v3 as a standard MOS simulation model, many other models are used throughout the semiconductor community. Their common approach is they are all highly scalable to cover a wide range of transistor dimensions. To cover this effect, a strategy for ef...
متن کاملBehavioral Modeling and Simulation of Semiconductor Devices and Circuits Using VHDL-AMS
During the past few years, a lot of work has been done on behavioral models and simulation tools. But a need for modeling strategy still remains. The VHDL-AMS language supports the description of analog electronic circuits using Ordinary Differential Algebraic Equations (ODAEs), in addition to its support for describing discrete-event systems. For VHDL-AMS to be useful to the analog design ...
متن کاملLimit of Dislocation Density and Ultra-Grain-Refining on Severe Deformation in Iron
It is well-known that severe deformation to metals causes a direct grain refinement of the matrix without special heat-treatments due to the mechanism of dynamic continuous recrystallization (DCR). However, the microstructural revolution during severe deformation is seemed to be different depending on the deformation mode, namely the direction of deformation. In general, multi-directional defor...
متن کامل