Designing high-performance electrochemical energy-storage nanoarchitectures to balance rate and capacity.

نویسندگان

  • Megan B Sassin
  • Cheyne P Hoag
  • Bradley T Willis
  • Nathan W Kucko
  • Debra R Rolison
  • Jeffrey W Long
چکیده

The impressive specific capacitance and high-rate performance reported for many nanometric charge-storing films on planar substrates cannot impact a technology space beyond microdevices unless such performance translates into a macroscale form factor. In this report, we explore how the nanoscale-to-macroscale properties of the electrode architecture (pore size/distribution, void volume, thickness) define energy and power performance when scaled to technologically relevant dimensions. Our test bed is a device-ready electrode architecture in which scalable, manufacturable carbon nanofoam papers with tunable pore sizes (5-200 nm) and thickness (100-300 μm) are painted with ~10 nm coatings of manganese oxide (MnOx). The quantity of capacitance and the rate at which it is delivered for four different MnOx-C variants was assessed by fabricating symmetric electrochemical capacitors using a concentrated aqueous electrolyte. Carbon nanofoam papers containing primarily 10-20 nm mesopores support high MnOx loadings (60 wt%) and device-level capacitance (30 F g(-1)), but the small mesoporous network hinders electrolyte transport and the low void volume restricts the quantity of charge-compensating ions within the electrode, making the full capacitance only accessible at slow rates (5 mV s(-1)). Carbon nanofoam papers with macropores (100-200 nm) facilitate high rate operation (50 mV s(-1)), but deliver significantly lower device capacitance (13 F g(-1)) as a result of lower MnOx loadings (41 wt%). Devices comprising MnOx-carbon nanofoams with interconnecting networks of meso- and macropores balance capacitance and rate performance, delivering 33 F g(-1) at 5 mV s(-1) and 23 F g(-1) at 50 mV s(-1). The use of carbon nanofoam papers with size-tunable pore structures and thickness provides the opportunity to engineer the electrode architecture to deliver scalable quantities of capacitance (F cm(-2)) in tens of seconds with a single device.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Cathodic ALD V 2 O 5 thin films for high - rate electrochemical energy storage 3

Atomic layer deposition (ALD) is attractive for next-generation electrical energy storage in forming passivation layers and more recently active storage material. Here we report a detailed study of ALD V2O5 as a high capacity cathode material, using vanadium tri-isopropoxide (VTOP) precursor with both O3 and H2O as oxidant. The O3-based process produces polycrystalline films with generally high...

متن کامل

Hydrothermal evolution, optical and electrochemical properties of hierarchical porous hematite nanoarchitectures

Hollow or porous hematite (α-Fe2O3) nanoarchitectures have emerged as promising crystals in the advanced materials research. In this contribution, hierarchical mesoporous α-Fe2O3 nanoarchitectures with a pod-like shape were synthesized via a room-temperature coprecipitation of FeCl3 and NaOH solutions, followed by a mild hydrothermal treatment (120°C to 210°C, 12.0 h). A formation mechanism bas...

متن کامل

Fabrication of cu based metal-organic framework / graphene Nanocomposite and study electrochemical performance in supercapacitors

High conductivity and high level of electrolyte availability are the main requirements of active materials used in supercapacitors (SCs) to achieve high electrochemical efficiency. In recent years, metal-organic frameworks (MOFs) have been used as electrode materials for SCs due to their suitability of porosity and high surface area. However, using single-component MOFs in supercapacitors resul...

متن کامل

Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries

Copper hexacyanoferrate (CuHCF) nanoparticles with tunnel-like Prussian blue structure were deposited on graphite substrate via pulse galvanostatic electrochemical deposition at 25 mA cm-2 with both on-time and off-time periods of 0.1 s, which presented the ability to intercalation/de-intercalation of Al ions reversibly in aqueous solution. The crystal structure of the as-prepared CuHCF f...

متن کامل

measurement the absorption capacity of solar energy storage technology

Although solar energy is one of the most important renewable energies in Iran that most areas of the country, especially the Central Desert, have considerable ability to use, but the random nature of this type of energy makes it difficult to predict its output power and may cause problems in the performance of the feed systems. For this reason, the use of energy storage systems for periods of l...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Nanoscale

دوره 5 4  شماره 

صفحات  -

تاریخ انتشار 2013