Stability Analysis of Sepic Converter Using Matlab/simulink
نویسندگان
چکیده
DC-DC converter is a converter where we are regulating the input voltage to get the desired output voltage which is either greater than or equal to or less than the input voltage with positive or negative polarity. A lot of dc-dc converters are available in the world out of which SEPIC (Single-Ended Primary-Inductor Converter) converter is one of them. To analyse the converter, a lot of techniques are available. This paper presents the use of MATLAB/SIMULINK to study the stability of the converter. The state space technique is applied to this higher order converter and converted into transfer function. The reduced order technique is applied to the system and compared with the higher order system which gives approximate results for all type of analysis.
منابع مشابه
Comparative Analysis of Performance of the SEPIC Converter Using PID and Fuzzy Logic Controllers for LED Lighting Applications
34 Abstract— This paper presents an analysis of the dynamic performance on DC-DC SEPIC (Single Ended Primary Inductor Converter) converter which is operating in continuous conduction mode (CCM) with PID and fuzzy logic controller implementation. The operational analysis and design is done for 20W load. SEPIC converter is a suitable converter when the input voltage has got wide variations around...
متن کاملPower Factor Correction using Valley-Fill SEPIC Topology with Fuzzy Logic Control
This paper deals with a new single ended primary inductance converter (SEPIC) for power factor correction (PFC). The proposed converter is used in combination with SEPIC and a valley fill circuit. The valley fill circuit improves the efficiency of the SEPIC by reducing the harmonics in the supply mains. The power factor is also enhanced compared to the conventional PFC converters. It uses the s...
متن کاملDesign of Soft Switching Sepic Converter Fed DC Drive Applications
High efficiency DC-DC converters with high-voltage gain have been researched due to increasing demands. A soft-switching single-ended primary inductor converter (SEPIC) is presented in this work. An auxiliary switch and a clamp capacitor are presented in this project. A coupled inductor and an auxiliary inductor are utilized to obtain ripple-free input current and achieve zero voltage-switching...
متن کاملModeling and multi-loop feedback control design of a SEPIC power factor corrector in single-phase rectifiers
In this paper, a comparative analysis of three multi-loops control schemes dedicated to the single ended primary inductance converter (SEPIC) power factor corrector (PFC) is presented. The first control technique uses a robust hysteresis current controller; the second control strategy consists of a frequency–domain linear design of regulators on the basis of a small-signal averaged model of the...
متن کاملA Modified Bridgeless Converter for SRM Drive with Reduced Ripple Current
Received Nov 1, 2014 Revised Mar 4, 2015 Accepted Apr 1, 2015 A Single Phase Switched Reluctance Motor is more popular in many industrial purposes for high speed applications because of its robust and rugged construction. For low cost and variable speed drive applications SRM are widely used.Due to doubly salient structure of motor, the torque pulsations are high when compared to other sinusoid...
متن کامل