Diffusion induced phase separation with crystallizable nylons. II. Relation to final membrane morphology
نویسندگان
چکیده
Intermediate stages during membrane formation by means of immersion precipitation were studied by cryo-substitution for the system nylon 4,6, formic acid and water. The presence, nature and size of solid particles was determined as a function of time and of the distance from the interface. The spherulitic nature of these particles was confirmed by staining the samples. It was shown that at a relatively low nucleation density the concentration profile in the film was hardly influenced by a starting phase separation process, while in a situation with a relatively high number of nuclei per volume concentration patterns must be considerable altered.
منابع مشابه
Diffusion induced phase separation with crystallizable nylons . I . Mass transfer processes for nylon 4 , 6
Mass transfer during membrane formation by means of phase inversion for a polymeric system with both a solid-liquid and a liquid-liquid equilibrium was studied on the basis of the theory developed by Reuvers and Smolders. During the first moments of immersion in the coagulation bath, the concentrations at the interface between bath and film are governed by the virtual liquid-liquid equilibrium....
متن کاملPreparation and characterization of polyethylene/ glass fiber composite membrane prepared via thermally induced phase separation method
Grinded glass fiber (GGF) embedded high density polyethylene (HDPE) membranes were prepared via thermally induced phase separation method. FESEM images showed that all the membranes had leafy structure, indicating a solid-liquid mechanism during phase separation. The results of EDX and TGA analyses confirmed that the fibers were dispersed in the HDPE matrix uniformly. Normalized water flux of t...
متن کاملHydophilic polypropylene microporous membrane for using in a membrane bioreactor system and optimization of preparation conditions by response surface methodology
In this study, the response surface methodology (RSM) based on the central composite design (CCD) was used to optimize the preparation condition of polypropylene-grafted maleic anhydride (PP-g-MA) microporous membrane by thermally-induced phase separation (TIPS) method. A mixture of dibutyl phthalate (DBP) and dioctyl phthalate (DOP) was used as diluent. The effect of polymer composition and qu...
متن کاملCentral composite experimental design applied to fabrication of LLDPE microporous membrane via thermally induced phase separation (TIPS) method
متن کامل
Phase separation processes in polymer solutions in relation to membrane formation
This review covers new experimental and theoretical physical research related to the formation of polymeric membranes by phase separation of a polymer solution, and to the morphology of these membranes. Two main phase separation processes for polymeric membrane formation are discussed: thermally induced phase separation and immersion precipitation. Special attention is paid to phase transitions...
متن کامل