On the Feedback Structure of Wideband Piezoelectric Shunt Damping Systems
نویسندگان
چکیده
This paper studies the feedback structure associated with piezoelectric shunt damping systems and introduces a new impedance structure for multi-mode piezoelectric shunt damping. The impedance is shown to be realizable using passive circuit components and digital implementation of the associated admittance transfer function is discussed. (Some figures in this article are in colour only in the electronic version)
منابع مشابه
A new multi-switch circuit with adaptive capacitance for semi-active piezoelectric shunt damping
Piezoelectric-based shunt dampers are developed in recent years because of simplicity in comparison with other methods. In these methods, a part of converted mechanical energy is stored in the internal el...
متن کاملA survey of recent innovations in vibration damping and control using shunted piezoelectric transducers
Research on shunted piezoelectric transducers, performed mainly over the past decade, has generated new opportunities for control of vibration and damping in flexible structures. This is made possible by the strong electromechanical coupling associated with modern piezoelectric transducers. In vibration control applications, a piezoelectric transducer is bonded to, or embedded in a base structu...
متن کاملCompact and Efficient Active Vibro-acoustic Control of a Smart Plate Structure
An effective wide band active control law through one kind of the Dynamic Vibration Absorber (DVA) is proposed and studied in this paper. With the help of mechanical impedance method, active DVA control law is formulated based on the passive mechanical model. The electrical DVA can generate multi-mode active damping to the structure. The host structure is an aluminum plate and acceleration sign...
متن کاملMultimodal Vibration Damping through Piezoelectric Patches and Optimal Resonant Shunt Circuits
Piezoelectric elements connected to shunt circuits and bonded to a mechanical structure form a dissipation device that can be designed to add damping to the mechanical system. Due to the piezoelectric effect, part of the vibration energy is transformed into electrical energy that can be conveniently dissipated. Therefore, by using appropriate electrical circuits, it is possible to dissipate str...
متن کاملImproved Current and Charge Amplifiers for Driving Piezoelectric Loads, and Issues in Signal Processing Design for Synthesis of Shunt Damping Circuits
Piezoelectric transducers are known to exhibit less hysterisis when driven with current or charge rather than voltage. Despite this advantage, such methods have found little practical application due to the poor low-frequency response of present current and charge driver designs. This paper introduces the compliance feedback current driver containing a secondary voltage feedback loop to prevent...
متن کامل