Molecular simulation study of miscibility of ternary and quaternary InGaAlN alloys

نویسندگان

  • Jhumpa Adhikari
  • David A. Kofke
چکیده

Molecular simulations are conducted to determine the limits of miscibility of a valence force field model for zinc-blende-structured In12x2yGaxAlyN semiconductor alloys. The transition matrix Monte Carlo method is used to calculate the free energy of the model alloys as a function of temperature and alloy composition ~considering both x and y ranging from zero to unity!. Analysis of the free-energy surface provides values for the upper critical solution temperature of the ternary alloys: InGaN ~1550 K!, InAlN ~2700 K!, and GaAlN ~195 K!. The miscibility envelope of the quaternary alloy is determined at 773 K and 1273 K. The excess properties of the mixtures are calculated, and it is found that the excess entropy is negligible, and the excess enthalpy is nearly independent of temperature. Consequently, regular-solution theory provides a good description of the thermodynamic properties of the alloys, and comparison of the simulation results with the phase behavior previously reported using regular-solution theory finds good agreement. Structural properties of the ternary compounds are examined in terms of the local compositions. For InGaN it is found ~surprisingly! that there is a slight preference for In atoms to have Ga atoms rather than other In atoms as neighbors, in comparison to a random mixture. The two other ternary compounds exhibit the expected behavior, in which the ~small! deviations from random mixing tend to favor segregation of like atoms. Among the ternaries, GaAlN is found to show the greatest deviations from random mixing. © 2004 American Institute of Physics. @DOI: 10.1063/1.1728317#

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

THERMAL ANALYSIS AND KINETICS OF THE PRECIPITATION IN WROUGHT Al-Mg, Al-Mg-ScAND Al-Mg-Sc-Me (Me=Zr, Ti) ALLOYS

Precipitation behaviour of wrought Al-6Mg alloys with ternary scandium and quaternary zirconium and titanium has been studied. Hardness measurements and resistivity studies are employed to assess the precipitation behaviour of scandium doped Al-6Mg alloy without or with quaternary additions of zirconium and titanium. Further, the kinetics of precipitations are studied by differential scanning c...

متن کامل

Performance of InGaN/GaN Laser Diode Based on Quaternary Alloys Stopper and Superlattice Layers

The optical properties of InGaN/GaN laser diode based on quaternary alloys stopper and superlattice layers are numerically studied using ISE TCAD (Integrated System Engineering) simulation program. Improvements in laser optical performance have been achieved using quaternary alloy as superlattice layers in InGaN/GaN laser diodes. Lower threshold current of 18 mA and higher output power and slop...

متن کامل

Thermodynamic Assessment of the Ba-cu-y Ternary System. Direct Optimization of the Miscibility Gap

Processing the experimental tie-lines in the miscibility gap of the Ba-Cu-Y ternary liquid alloys coupled with the Gibbs energies of the Ba-Cu and Cu-Y binaries estimated earlier has led to description of the Gibbs energy of the ternary melt and to the complete ternary phase diagram. The transformation of an open triangular simplex to the plane that can ease significantly optimization and calcu...

متن کامل

In vitro biocompatibility of novel Au-Pt-based metal-ceramic alloys.

The aim of this research was to evaluate the effect of individual metallic elements within experimental Au-Pt-based metal-ceramic alloys on in vitro biocompatibility. A binary Au-10 at.% Pt alloy (AP10) was designed as a parent alloy. Six ternary AP10-X (X = In/Fe/Sn/Zn) alloys and four quaternary (AP10-In2)-Y (Y = Fe/Sn/Zn) with different compositions were cast into square plates with size 10X...

متن کامل

ساختار و خواص مغناطیسی آلیاژهای ‍‍CoFeSiB انجماد سریع یافته

The effects of metalloids Si(4-27 at%) and B(5-22 at%) on the structure and magnetic properties of melt spun cobalt based alloys containing 5at% Fe have been studied. XRD results revealed that in non-eutectic ternary CoFeSi and CoFeB alloys, the additions of Si or B, alone can not lead to full amorphization of melt spun ribbons. In quaternary CoFeSiB alloys, the total amounts of Si and B additi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004