Theoretical and Experimental Research Aspects of Compressor Installations with Multisection Gascoolers
نویسنده
چکیده
Improving the cooling systems is one feasible technique to ameliorate the characteristics of compressor installations. This paper presents the results of theoretical and experimental researches of staged compressed gas cooling process through several coolants with arlferent properties in multisection gascoolers. The theoretical investigation was conducted using a developed mathematical modeL which was represented as a system of equivalent mathematical models in three hierarchy levels. The experimental investigation was conducted with twoand trisectional gascoolers based on platefin and tube heat exchange surfaces. The complex approach to the multilevel optimization of multisection gascoolers is written.
منابع مشابه
An Outrun Competition of Corrosion Fatigue and Stress Corrosion Cracking on Crack Initiation in a Compressor Blade
First row rotating blades of four axial-flow compressors were prematurely fractured. Previous investigations showed that the site atmosphere contains corrosive compounds which lead to an increase in possibility of pitting on the blades. It was also revealed that the crack was originated from two corrosion pits. Thus, this work is conducted to ascertain which of fatigue or stress corrosion crack...
متن کاملVibration Analysis of an Air Compressor Based on a Hypocycloidal Mechanism: an Experimental Study
In this paper, the experimental vibration analysis of a single cylinder air compressor based on a hypocycloid straight line mechanism (HSM) is investigated. The HSM mechanism uses planetary gears to convert rotational motion to purely linear motion. In the conventional air compressor, the slider- crank mechanism is replaced by the HSM mechanism with appropriate counterweights. The constructed s...
متن کاملPerformance Modeling and Examination of Losses in the Axial -Flow Compressor and Comparisonwith Experimental Results
The performance prediction of axial flow compressors at different speeds and under various pressure ratio conditions are still being developed because of costly empirical experiments. One-dimensional modeling is a simple, fast and accurate method for performance prediction in any type of compressor with different geometries. In this approach, inlet flow conditions and compressor geometry are kn...
متن کاملEffects of Impeller Gap on Rotor Vibration in a High Speed Centrifugal Compressor: A Numerical and Experimental Analysis (TECHNICAL NOTE)
Centrifugal compressors produce high pressure ratio and rotate at speeds. So, a tiny unbalance can produce severe vibration. In this paper, effects of impeller gap on rotor vibration in a high speed centrifugal compressor is investigated. For this purpose, a numerical and experimental analysis are carried out. The moving reference frame method in FLUENT software is used for modeling of geometri...
متن کاملDevelopment of a compression system dynamic simulation code for testing and designing of anti-surge control system
In recent years, several research activities have been conducted to develop knowledge in analysis, design and optimization of compressor anti-surge control system. Since the anti-surge control testing on a full-scale compressor is limited to possible consequences of failure, and also the experimental facility can be expensive to set up control strategies and logic, design process often involves...
متن کامل