Patterning of narrow Au nanocluster lines using V2O5 nanowire masks and ion-beam milling
نویسندگان
چکیده
منابع مشابه
Magnetic Force Microscopy Imaging of Current Paths
We demonstrate Magnetic Force Microscopy (MFM) imaging, at room temperature in air, of a 0.25mA DC current path in a 140nm-wide gold nanowire. The nanowire was created by focused ion beam milling of a 12μm wide Cr/Au line of 20nm/110nm Cr/Au thickness. Iterative fitting of the MFM data to an idealized model of the structure yielded a nanowire resistivity a factor of 3.5 higher than that of a co...
متن کاملPatterning Amorphous Fluoropolymer Films by Reactive Ion Milling
Amorphous fluoropolymer films have low dielectric constants and high chemical resistance and, so, have potential to be used as the insulator for high speed interconnects and as protection layers. Many applications would require high resolution patterning of the fluoropolymer film. We have found that these films are easily etched by reactive ion beam etching using an O2/Ar gas mixture. High etch...
متن کاملCreation of Controlled Defects Inside Colloidal Crystal Arrays with a Focused Ion Beam
In this work the reliability of the focused-ion-beam (FIB) patterning on polystyrene (PS) colloidal crystals at different scales is determined. Ordered arrays of PS spheres (465 nm) are successfully modified by selectively removing a single sphere. The water-vapor assisted FIB milling is crucial to obtain this result. Furthermore, isolated PS spheres are FIB drilled with or without chemically e...
متن کاملOne-dimensional photonic crystal cavities in single-crystal diamond
The realization of efficient optical interfaces for nitrogen vacancy centers in diamond is an important problem in quantum science with potential applications in quantum communications and quantum information processing. We describe and demonstrate two techniques for fabricating one-dimensional photonic crystal cavities in single-crystal diamond, using (1) a combination of reactive ion etching ...
متن کاملClose-packed noncircular nanodevice pattern generation by self-limiting ion-mill process.
We describe a self-limiting, low-energy argon-ion-milling process that enables noncircular device patterns, such as squares or hexagons, to be formed using precursor arrays of uniform circular openings in poly(methyl methacrylate) defined using electron beam lithography. The proposed patterning technique is of particular interest for bit-patterned magnetic recording medium fabrication, where sq...
متن کامل