Comparison of organic solar cells and inorganic solar cells

نویسنده

  • Askari Mohammad Bagher
چکیده

The fluctuating price of energy, due to a variety of reasons ranging from geo-political constraints to national and international economic issues, and the fact that these energy resources are finite, can be seen as the main incentives to make a transition to a clean energy society. Solar energy is just one of many ways to make this transition a reality, and of the raft of clean energy technologies available, solar energy technology does offer appealing prospects. With the fact that solar energy offers an inexhaustible supply that is literally pollution-free, and coupled to the fact that the planet receives more sunlight in one day than what is required to meet the energy demands of the world for one year, utilizing this resource will undeniably be good for the business community and for the public. While solar energy has been harnessed for centuries, the modern approach has been to construct solar cells and solar module arrays using silicon; with the experience garnered from its use in the semiconductor industry, silicon was a natural choice for use in converting sunlight into usable electricity.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of TiO2 Nanofiber Density on Organic-Inorganic Based Hybrid Solar Cells (RESEARCH NOTE)

Abstract In this work, a comparative study of hybrid solar cells based on P3HT and TiO2 nanofibers was accomplished. Electrospinning, a low cost production method for large area nanofibrous films, was employed to fabricate the organic-inorganic hybrid solar cells based on poly (3-hexylthiophene) and TiO2 nanofibers. The performance of the hybrid solar cells was analyzed for four density levels ...

متن کامل

Investigation of the Effect of Band Offset and Mobility of Organic/Inorganic HTM Layers on the Performance of Perovskite Solar Cells

Abstract: Perovskite solar cells have become an attractive subject in the solar energydevice area. During ten years of development, the energy conversion efficiency has beenimproved from 2.2% to more than 22%, and it still has a very good potential for furtherenhancement. In this paper, a numerical model of the perovskite solar cell with thestructure of glass/ FTO/ TiO2/...

متن کامل

بهبود چگالی جریان و افزایش کارایی سلول خورشیدی پلیمری P3HT:PCBM با استفاده از نانومیله اکسید روی

Hybrid solar cells combine organic and inorganic materials with the aim of utilizing the low cost cell production of organic photovoltaics (OPV) as well as obtaining other advantages, such as tuneable absorption spectra, from the inorganic component. Whilst hybrid solar cells have the potential to achieve high power conversion efficiencies (PCE), currently obtained efficiencies are quite low. T...

متن کامل

بررسی اثر فازی آلومینا بر بلورینگی لایه پروسکایت در سلول‌های خورشید پروسکایتی

Organic-inorganic perovskite (CH3NH3PbI3), due to an appropriate energy gap to absorb sunlight, is used as an absorbent layer in third generation solar cells. Crystallinity of light absorbing layer plays an important role in the performance of perovskite solar cells and substrate plays an important role on crystallinity of light absorbing layer. In superstructure solar cells, alumina (aluminum ...

متن کامل

Investigation of Organic Compounds as Photosensitizer for Dye Sensitized Solar Cells

Two organic compounds (SC-23=(E)-2-Cyano-3-(2,3-dimethoxyphenyl) acrylic acid and SC-25=(E)-2-Cyano-3-(2,5-dimethoxyphenyl) acrylic acid) involving methoxy groups as the electron donor and cyanoacrylic acid group as the electron acceptor have been investigated for dye sensitized solar cells. They shows a short-circuit current density (Jsc) of 2.08 and 1.81 mA cm-2, an open circuit voltage (Voc)...

متن کامل

Fabrication of Inorganic Sensitized Solar Cells by Drop Casting Deposition of PbSe and PbTe on the TiO2 Surface

In this work, PbSe and PbTe sensitized TiO2 solar cells were fabricated. PbSe and PbTe nanostructure was deposited on the TiO2 surface via a drop cast method. The fabricated surfaces were examined by atomic force microscopy (AFM). Also the optical properties of the layers were studied by diffuse reflectance spectroscopy (DRS) spectra. The morphology of the surfaces was obtained by scanning elec...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014