3D-simulation of the turbulent wake behind a wind turbine
نویسندگان
چکیده
The paper relates to the simulation of the airflow around a wind turbine (WT) of the type ENERCON E66 with emphasis on the turbulent wake. The simulations were undertaken with the Computational Fluid Dynamics (CFD) software ANSYS FLUENT 6.3 using the LES technique for turbulence modeling. It is the aim of the work to capture the full threedimensional turbulent flow behind a WT in a sufficient spatial and temporal resolution to generate information for wind loads of WTs in wind farm configuration. This information shall help to optimize wind farm layouts in the future. Using an incoming wind field that matches the requirements of the IEC-61400 for wind fields used in load calculations it was possible to simulate a full meandering turbulent wake. The turbulent features of the WT wake could be reproduced with numerical methods not using further assumptions but solely based on the WT geometry and the solution of the governing physical equations. The project is supported by ENERCON GmbH, Germany.
منابع مشابه
A semi-analytical model for velocity profile at wind turbine wake using blade element momentum
The shape of wake behind a wind turbine is normally assumed to have a hat shape for the models used in wind farm layout optimization purposes; however, it is know from experimental tests and numerical simulations that this is not a real assumption. In reality, the results of actual measurements and detailed numerical simulation show that the velocity in wake region has a S-shape profile. Th...
متن کاملA semi-analytical model for velocity profile at wind turbine wake using blade element momentum
The shape of wake behind a wind turbine is normally assumed to have a hat shape for the models used in wind farm layout optimization purposes; however, it is know from experimental tests and numerical simulations that this is not a real assumption. In reality, the results of actual measurements and detailed numerical simulation show that the velocity in wake region has a S-shape profile. The pr...
متن کاملEffects of incoming surface wind conditions on the wake characteristics and dynamic wind loads acting on a wind turbine model
Articles you may be interested in Decay of the supersonic turbulent wakes from micro-ramps The interaction of helical tip and root vortices in a wind turbine wake Distribution of spanwise enstrophy in the near wake of three symmetric elongated bluff bodies at high Reynolds number Large eddy simulation study of scalar transport in fully developed wind-turbine array boundary layers Phys. Effect o...
متن کاملAn Experimental Investigation on the Wake Characteristics behind a Novel Twin-Rotor Wind Turbine
An experimental study was performed to examine the wake characteristics and aeromechanic performance of an innovative twin-rotor wind turbine (TRWT) in comparison with those of a conventional single-rotor wind turbine (SRWT). The comparative study was conducted in a large-scale Aerodynamic/Atmospheric Boundary Layer (AABL) wind tunnel with the TRWT and SRWT model sited in simulated atmospheric ...
متن کاملDirect Numerical Simulation of the Wake Flow Behind a Cylinder Using Random Vortex Method in Medium to High Reynolds Numbers
Direct numerical simulation of turbulent flow behind a cylinder, wake flow, using the random vortex method for an incompressible fluid in two dimensions is presented. In the random vortex method, the primary variable is vorticity of the flow field. After generation on the cylinder wall, it is followed in two fractional time step in a Lagrangian system of coordinates, namely convection and diffu...
متن کامل