Experimental investigation about influences of longitudinal-mode structure of pumping source on a Ti:sapphire laser.
نویسندگان
چکیده
Using a multi-longitudinal-mode (MLM) and a single-longitudinal-mode (SLM) all-solid-state green lasers to be the pumping sources of a continuous-wave Ti:sapphire laser, respectively, the intensity-noise dependence of the Ti:sapphire laser on the longitudinal-mode structure of pumping sources is experimentally studied. The comparison between the theoretical prediction based on the quantum-mechanical model and the experimental measurement for the intensity-noise spectra is presented.
منابع مشابه
Error Analysis, Design and Modeling of an Improved Heterodyne Nano-Displacement Interferometer
A new heterodyne nano-displacement with error reduction is presented. The main errors affecting the displacement accuracy of the nano-displacement measurement system including intermodulation distortion error, cross-talk error, cross-polarization error and phase detection error are calculated. In the designed system, a He-Ne laser having three-longitudinal-mode is considered as the stabiliz...
متن کاملساختار مد طولی برای تشدیدگر حلقوی ناهم سطح
The structure of longitudinal modes of a passively Q-switched, non-planar unidirectional ring-resonator,with Nd:YAG active medium is described in this article. Two different techniques are used to study the longitudinal mode structure of the laser resonator. At first, the fast-fourier transform technique is applied for analyzing the mode beating of the optical fields by intensity frequency str...
متن کامللیزر Ce:Nd:YAG با دمش دیود نورگسیل و سوییچ Q انفعالی
The experimental study of passively Q-switched, LED-pumped Ce:Nd:YAG laser is reported. The active medium is a 3 mm diameter laser rod with 60 mm length; it is optically pumped with four segments of blue LEDs at 460 nm, with each segment consisting of 32 single LEDs. The 14 cm length optical resonator with 2 dielectric mirrors and the reflectivity of 99 and 93 percent at 1064 nm produced more t...
متن کاملEXPERIMENTAL AND NUMERICAL INVESTIGATION ON LASER BENDING PROCESS
Laser bending is an advanced process in sheet metal forming in which a laser heat source is used to shape the metal sheet. In this paper, temperature distribution in a mild steel sheet metal is investigated numerically and experimentally. Laser heat source is applied through curved paths in square sheet metal parts. Finite element (FE) simulation is performed with the ABAQUS/CAE standard softwa...
متن کاملAll Solid-State Passively Mode-Locked Ultrafast Lasers Based on Nd, Yb, and Cr Doped Media
Mode-locking technique is a widely used method for generating ultrashort laser pulses. The mode-locked laser output is a sequence of equally spaced laser pulses. The pulse width is limited by the spectral range of the gain medium and inversely related to the bandwidth of the laser emission. Compared with the active mode-locking technique, passively modelocked laser with saturable absorber is ab...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 19 2 شماره
صفحات -
تاریخ انتشار 2011