Cyanate Ester Resin Modified with Nano-particles for Inclusion in Continuous Fiber Reinforced Composites
نویسنده
چکیده
Executive Summary 1 Chapter 1: Introduction 4 Chapter 2: Bisphenol E Cyanate Ester/Multiwalled Carbon Nanotubes 8
منابع مشابه
Cyanate Ester/ TriSilanolPhenyl-POSS Nanocomposites
Kaiwen Liang, Hossein Toghiani, and Charles U. Pittman Jr. Dave C. Swalm School of Chemical Engineering, Mississippi State University, MS 39762. Department of Chemistry, Mississippi State University, MS 39762. Carbon-carbon materials are traditionally designed for high temperature applications. Carbon-carbon materials are composites formed by impregnating continuous carbon fiber cloths or prefo...
متن کاملCharacterization and Process Development of Cyanate Ester Resin Composites
Cyanate ester resins offer advantages as composite matrices because of their high thermal stability, low outgassing, low water absorption, and radiation resistance. This paper describes the results of a processing study to develop a high-strength hoop-wound composite by the wet-filament winding method using Toray T1000G carbon fiber and YLA RS-14A cyanate ester resin as the constituent material...
متن کاملExperimental characterization of fibre-reinforced composites improved with nanofibres or nanotubes
A review is presented on the testing and mechanical properties of continuous fibre reinforced composites modified with nanotubes or nanofibres either dispersed in the resin or grown on the microfibres. The nano-level cross-links are shown to be able to (1) increase the fibre/matrix interfacial strength, (2) reduce the inter-fibre crack growth, and (3) improve the inter-ply delamination resistan...
متن کاملDevelopment of Nanofiber Reinforced Transparent Composites
This paper focuses on application of co-axial electrospinning technique to the development of nanofiber reinforced transparent composites. Investigations have been done on fabrication and functionalization of the transparent composites with improved mechanical properties, thermal properties and shielding ability for ultraviolet radiations. In the fabrication, PMMA, a polymer with excellent visi...
متن کاملPREDICTING THE STIFFNESS OF BIAXIAL BRAIDED FIBER COMPOSITES BY INCORPORATION OF CARBON NANO FIBER
In this study, carbon nano fibers (CNFs) were mixed into epoxy resin through a magnetic stirrer and again mixed using ultra sonicator. Using hand layup technique, biaxial braided fiber composites were prepared with unfilled, 0.2, 0.5 and 1 wt% CNF. Tensile test and shear test was performed to identify the tensile strength and shear strength of the composites. Fractured surface of the tensile sp...
متن کامل