Using Capacitive Probes in Electromagnetic Nondestructive Testing
نویسنده
چکیده
In an attempt to expand the scope of electromagnetic testing to include poorly conducting materials, we have tried using a low frequency capacitive probe. This probe has given promising performances in testing materials with resistivities of several hundred ohm-centimeters.
منابع مشابه
Microwave Nondestructive Testing of Conductive Materials Using Sensor Tuned with Negative Permeability and Permittivity Structure
Microwave nondestructive testing methods become nowadays ever more exploited electromagnetic evaluation method not only dielectric but also metal materials surface and volume homogeneity. A novel microwave sensor created from open waveguide with metamaterial structure for non-destructive testing was developed in an attempt to increase the sensitivity of the microwave nondestructive evaluation m...
متن کاملDesign of Nondestructive System for Hardness of Carbonitrided Steel Parts Using Eddy Current Testing Method: Case study on the Tappet Parts
In this paper, a non-destructive eddy current test system was designed to evaluate the surface hardness of the carbonitrided steel parts. For this purpose, various samples of the tappet were used after the surface hardening and grinding operations as control samples and, if necessary, were subjected to destructive and non-destructive tests. Microstructural studies were performed with a microsco...
متن کاملInspection of Train Hollow Axles by Measuring AC Field Vector
In this paper a new electromagnetic nondestructive system for inspection of train hollow axle is presented. The system allows to observe changes of vector AC fields in order to enhance the probability of proper classification. The performance of the system is verified using hollow axle sample with artificial notches of different depths. The experimental results are presented and discussed. Keyw...
متن کاملDeep Flaw Detection with Giant Magnetoresistive (gmr) Based Self-nulling Probe
The use of giant magnetoresistive (GMR) sensors for electromagnetic nondestructive evaluation has grown considerably in the last few years [1-4]. Technological advances in the research and development of giant magnetoresistive materials has led to commercially available GMR sensors with many qualities well suited for electromagnetic NDE. Low cost GMR magnetometers are now available which are hi...
متن کاملContactless electromagnetic measuring system using conventional calibration algorithms to determine scattering parameters
In this paper, a contactless measuring system for the determination of the S-parameters of planar circuits is presented. With a contactless measuring system it is possible to characterise a device-under-test (DUT) embedded in a planar circuit environment without cutting the planar transmission lines connecting the DUT. The technique utilizes four identical capacitive probes in conjunction with ...
متن کامل