Sitotoksisitas resin akrilik hybrid setelah penambahan glass fiber dengan metode berbeda (Cytotoxicity of the hybrid acrylic resin after glass fiber reinforcement with difference method)
نویسنده
چکیده
Glass fiber reinforcement of the hybrid acrylic resin with difference method can enhance residual monomer content of the material; it can cause cytotoxic effect on fibroblast cells. The purpose of this study was to know the cytotoxicity of hybrid acrylic resins after glass fiber reinforcement with difference method on the cultured fibroblasts. The squared specimens of 10 mm in length, 10 mm in width and 1.5 mm in thickness were cured for 20 minutes at 100° C. The fibroblast cells were grown in Eagle's Minimum Essential Medium to be 2 × 105 cells/ml, then the cells were added to the samples in the plates and incubated at 37° C. After 48 hours, the cytotoxic effect was determined by direct cell number count using microscope and a hemocytometer. The statistical analyses using one way ANOVA and LSD test showed that there were significant difference in cell viability (p < 0.05) among the groups. The means percentage of cell viability were 90.00%, 99.,11%, 98.66%, it could be concluded that glass fiber reinforcement into hybrid acrylic resin with either first method or second method was not toxic.
منابع مشابه
Strength of Glass Fiber Reinforced Pmma Resin and Surface Roughness Change after Abrasion Test
Statement of the problem. The fracture of acrylic resin dentures remains an unsolved problem. Therefore, many investigations have been performed and various approaches to strengthening acrylic resin, for example, the reinforcement of heat-cured acrylic resin using glass fibers, have been suggested over the years. But problems such as poor workability, rough surface, poor adhesion of glass fiber...
متن کاملEffect of Water Storage on the Flexural Strength of Heat-cured Denture Base Resin Reinforced with Stick (s) Glass Fibers
BACKGROUND Flexural strength (FS) of denture base resins (DBRs) had been improved by reinforcing it with different glass fibers. However, a limited data are available on the effect of glass fiber reinforcement with conventional heat-cured resin after prolonged water storage. AIMS AND OBJECTIVES This study aimed to evaluate the reinforcing effect of novel S-glass and nylon fibers on the FS of ...
متن کاملEffect of Glass Fiber and Silane Treated Glass Fiber Reinforcement on Impact Strength of Maxillary Complete Denture
Background and objectives : The fracture of acrylic maxillary complete dentures is a commonly seen clinical problem which usually occurs due to heavy occlusal forces or accidental damage.The objectives of the study were to measure the impact strength of maxillary complete dentures fabricated with high impact acrylic resin and to evaluate the effect of woven E-glass fiber and silane treated glas...
متن کاملThe Reinforcement Effect of Nano-Zirconia on the Transverse Strength of Repaired Acrylic Denture Base
Objective. The aim of this study was to evaluate the effect of incorporation of glass fiber, zirconia, and nano-zirconia on the transverse strength of repaired denture base. Materials and Methods. Eighty specimens of heat polymerized acrylic resin were prepared and randomly divided into eight groups (n = 10): one intact group (control) and seven repaired groups. One group was repaired with auto...
متن کاملEffect of surface treatments on damping behavior of carbon and glass fiber reinforced friction material
The ability to absorb vibrations in a vehicle during braking conditions depends primarily on the selection of ingredients for a friction material and interfacial adhesion between all these ingredients. In this work, a hybrid brake friction material is developed by combination of carbon fiber (CF), glass fiber (GF), resin and other ingredients. The surfaces of carbon and glass fibers are c...
متن کامل