Study of fire retardant behavior of carbon nanotube membranes and carbon nanofiber paper in carbon fiber reinforced epoxy composites
نویسندگان
چکیده
Single-walled carbon nanotube (SWCNT) and multi-walled carbon nanotube (MWCNT) membranes (buckypaper) and carbon nanofiber (CNF) paper were incorporated onto the surface of epoxy carbon fiber composites, as proposed fire shields. Their flammability behaviors were investigated by a cone calorimeter. SWCNT buckypaper and CNF paper did not show notable improvement on fire retardancy. However, MWCNT buckypaper acted as an effective flame-retardant shield, reducing the peak heat release rate by more than 60% and reducing smoke generation by 50% during combustion. The pore structures of buckypapers and CNF paper were characterized by scanning electron microscopy (SEM), mercury intrusion porosimetry, and N2 adsorption isotherms. Gas permeability of buckypaper and carbon nanofiber paper was measured. The correlation between buckypaper and CNF paper properties and their fire retardancy was discussed. 2010 Elsevier Ltd. All rights reserved.
منابع مشابه
Dynamic Characteristics of Functionalized Carbon Nanotube Reinforced Epoxy Composites: An Experimental Approach
The effects of amine functionalization of carbon nanotubes (CNTs) and CNTs weight percent (wt. %), on the first bending natural frequencies and damping properties of CNT/epoxy composites are investigated in this paper. CNTs and amine functionalized CNTs (AFCNTs), with two different weight percentages, are used to manufacture the beam shaped specimens. Epoxy, CNT/epoxy (0.25 and 0.5 wt. % of CNT...
متن کاملMULTISCALE FIBER REINFORCED COMPOSITES USING A CARBON NANOFIBER/EPOXY NANOPHASED MATRIX: PROCESSING, PROPERTIES, AND THERMOMECHANICAL BEHAVIOR by KEITH JAMAHL GREEN DERRICK R. DEAN, COMMITTEE CHAIR
Fiber-reinforced polymer composites (FRCs) have shown great promise as high strength structural materials due to their high stiffness to weight ratio and their ease in processing. They have found extensive use in aerospace, automotive, construction, and recreational equipment material applications. Research in polymer-based nanocomposites (PNCs) has shown explosive growth in the past decade wit...
متن کاملFinite Element Analysis of Low Velocity Impact on Carbon Fibers/Carbon Nanotubes Reinforced Polymer Composites
An effort is made to gain insight on the effect of carbon nanotubes (CNTs) on the impact response of carbon fiber reinforced composites (CFRs) under low velocity impact. Certain amount of CNTs could lead improvements in mechanical properties of composites. In the present investigation, ABAQUS/Explicit finite element code (FEM) is employed to investigate various damages modes of nano composites ...
متن کاملEffect of Fiber Surface Treatment on Wear Characteristics of Carbon Fiber Reinforced Polyamide 6 Composites
Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...
متن کاملEffect of Carbon Nanotube and Surfactant on Processing, Mechanical, Electrical and EMI-Shielding of Epoxy Composites
Dispersing nanoparticles in a polymer matrix is intrinsically challenging due to unfavorable entropic interactions between the matrix and the nanoparticle. In this research dispersion of nanoparticles in polymer matrix was studied and the effect of dispersion on properties was investigated. The properties of polymer composite depend on the type, size, shape, concentration of nanoparticles, and ...
متن کامل