Activation of molecular oxygen and the nature of the active oxygen species for CO oxidation on oxide supported Au catalysts.

نویسندگان

  • D Widmann
  • R J Behm
چکیده

Although highly dispersed Au catalysts with Au nanoparticles (NPs) of a few nanometers in diameter are well-known for their high catalytic activity for several oxidation and reduction reactions already at rather low temperatures for almost 30 years, central aspects of the reaction mechanism are still unresolved. While most studies focused on the active site, the active Au species, and the effect of the support material, the most crucial step during oxidation reactions, the activation of molecular oxygen and the nature of the resulting active oxygen species (Oact), received more attention just recently. This is topic of this Account, which focuses on the formation, location, and nature of the Oact species present on metal oxide supported Au catalysts under typical reaction conditions, at room temperature and above. It is mainly based on quantitative temporal analysis of products (TAP) reactor measurements, which different from most spectroscopic techniques are able to detect and quantify these species even at the extremely low concentrations present under realistic reaction conditions. Different types of pulse experiments were performed, during which the highly dispersed, realistic powder catalysts are exposed to very low amounts of reactants, CO and/or O2, in order to form and reactively remove Oact species and gain information on their formation, nature, and the active site for Oact formation. Our investigations have shown that the active oxygen species for CO oxidation on Au/TiO2 for reaction at 80 °C and higher is a highly stable atomic species, which at 80 °C is formed only at the perimeter of the Au-oxide interface and whose reactive removal by CO is activated, but not its formation. From these findings, it is concluded that surface lattice oxygen represents the Oact species for the CO oxidation. Accordingly, the CO oxidation proceeds via a Au-assisted Mars-van Krevelen mechanism, during which surface lattice oxygen close to the Au NPs is removed by reaction with CO, resulting in a partially reduced TiO2 surface, which is subsequently reoxidized by O2. We demonstrate that this is the dominant reaction pathway for Au catalysts based on reducible metal oxides in general, at typical reaction temperatures, while for less active Au catalysts based on nonreducible metal oxides, this reaction pathway is not possible and the remaining activity must arise from another pathway, most probably a Au-only mechanism. At lower reaction temperature, reactive removal of Oact becomes increasingly inhibited, leading to a change in the dominant reaction pathway.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Active oxygen on a Au/TiO2 catalyst: formation, stability, and CO oxidation activity.

Since their introduction by Haruta, oxide supported Au catalysts with Au nanoparticles (NPs) of few nanometers in diameter have attracted enormous interest because of their high activity for various oxidation and reduction reactions most prominently the CO oxidation reaction. Mechanistic details and hence the physical origin of their high activity, however, are still controversial. Focusing on ...

متن کامل

Competition of CO and H2 for Active Oxygen Species during the Preferential CO Oxidation (PROX) on Au/TiO2 Catalysts

Aiming at an improved mechanistic understanding of the preferential oxidation of CO on supported Au catalysts, we have investigated the competition between CO and H2 for stable, active oxygen (Oact) species on a Au/TiO2 catalyst during the simultaneous exposure to CO and H2 with various CO/H2 ratios at 80 ̋C and 400 ̋C by quantitative temporal analysis of products (TAP) reactor measurements. It...

متن کامل

Catalytic Oxidation of Carbon Monoxide by Cobalt Oxide Catalysts Supported on Oxidized-MWCNT

Cobalt oxide catalysts supported on oxidized multi-walled carbon nanotubes (MWCNT) for the low-temperature catalytic oxidation of carbon monoxide were prepared by an impregnation-ultrasound method. These catalysts were characterized by N2 adsorption/desorption, TEM, XRD, Raman, and H2-TPR methods. The XRD and Raman results indicated that the phase of the synthesized cobalt...

متن کامل

Effects of Excess Cobalt Oxide Nanocrystallites on LaCoO3 Catalyst on Lowering the Light off Temperature of CO and Hydrocarbons Oxidation

Catalysts with the formula of LaCo(1+x)O(3+δ), where 0 ≤ x ≤ 1, were studied for oxidation of CO and C2H6 in a synthetic exhaust gas, comprising 6.0 % CO and 0.2 % C2H6 in Ar. Ethane was selected as a model for hydrocarbons in the exhaust gas. The performance of catalysts is correlated to their properties, particularly their ...

متن کامل

Crossed ferric oxide nanosheets supported cobalt oxide on 3-dimensional macroporous Ni foam substrate used for diesel soot elimination under self-capture contact mode.

Crossed Fe2O3 nanosheets supported cobalt oxide nanoparticles on three-dimensionally macroporous nickel foam substrate (xCo/Fe-NF) was designed and successfully prepared through a facile hydrothermal and impregnation route. These catalysts showed high catalytic soot combustion activities under self-capture contact mode. The three-dimensional macroporous structures of Ni foam and the crossed Fe2...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Accounts of chemical research

دوره 47 3  شماره 

صفحات  -

تاریخ انتشار 2014