New Dynamic Constitutive Model for OFHC Copper Film
نویسنده
چکیده
The material properties of OFHC copper film was investigated with the High-Speed Material Micro Testing Machine (HSMMTM) at the high strain rates. The rate-dependent stress-strain curves from the experiment and the Johnson−Cook curve fitting showed large discrepancies as the plastic strain increases since the constitutive model implies no rate-dependent strain hardening effect. A new constitutive model was proposed in consideration of rate-dependent strain hardening effect. The strain rate hardening term in the new constitutive model consists of the strain rate sensitivity coefficients of the yield strength and strain hardening. Keywords—Rate dependent material properties, Dynamic constitutive model, OFHC copper film, Strain rate.
منابع مشابه
A constitutive model for fcc crystals with application to polycrystalline OFHC copper
Based on the results of a series of experiments on commercially pure OFHC copper (an fcc polycrystal), a physically based, rateand temperature-dependent constitutive model is proposed for fcc single crystals. Using this constitutive model and the Taylor averaging method, numerical calculations are performed to simulate the experimental results for polycrystalline OFHC copper. The model calculat...
متن کاملOn criteria for dynamic adiabatic shear band propagation
In this work, we postulate the physical criterion for dynamic shear band propagation, and based on this assumption, we implement a numerical algorithm and a computation criterion to simulate initiation and propagation of dynamic adiabatic shear bands (ASBs). The physical criterion is based on the hypothesis that material inside the shear band region undergoes a dynamic recrystallization process...
متن کاملOn Computational Modelling of Strain-Hardening Material Dynamics
In this paper we show that entropy can be used within a functional for the stress relaxation time of solid materials to parametrise finite viscoplastic strainhardening deformations. Through doing so the classical empirical recovery of a suitable irreversible scalar measure of work-hardening from the three-dimensional state parameters is avoided. The success of the proposed approach centres on d...
متن کاملCreep Effects in the Toroidal Field Coils of Fire and Other Burning Plasma Tokamaks
All three burning plasma experiments discussed at Snowmass during the summer of 2002, use preloaded structures to resist some component of the operating loads. For the resistive pulsed reactors, it is the preloads which introduce the most noticeable creep responses because these loads are applied for much longer than the operating loads. If the preloads are maintained during shut-down and maint...
متن کاملExponential-type Constitutive Equation in Order to Use in Modeling the Warm Deformation of a Eutectoid Steel
The main contribution of the present work is to investigate the capability of exponential-type constitutive equationto model the warm deformation flow curves of a eutectoid steel in the temperature range of 620-770 °C andat the strain rates in the range of 0.01-10 s-1 conducted on a Gleeble-1500 thermomechanical simulator. Warmdeformation in this temperature range f...
متن کامل