Triple-Junction Hybrid Tandem Solar Cells with Amorphous Silicon and Polymer-Fullerene Blends
نویسندگان
چکیده
Organic-inorganic hybrid tandem solar cells attract a considerable amount of attention due to their potential for realizing high efficiency photovoltaic devices at a low cost. Here, highly efficient triple-junction (TJ) hybrid tandem solar cells consisting of a double-junction (DJ) amorphous silicon (a-Si) cell and an organic photovoltaic (OPV) rear cell were developed. In order to design the TJ device in a logical manner, a simulation was carried out based on optical absorption and internal quantum efficiency. In the TJ architecture, the high-energy photons were utilized in a more efficient way than in the previously reported a-Si/OPV DJ devices, leading to a significant improvement in the overall efficiency by means of a voltage gain. The interface engineering such as tin-doped In2O3 deposition as an interlayer and its UV-ozone treatment resulted in the further improvement in the performance of the TJ solar cells. As a result, a power conversion efficiency of 7.81% was achieved with an open-circuit voltage of 2.35 V. The wavelength-resolved absorption profile provides deeper insight into the detailed optical response of the TJ hybrid solar cells.
منابع مشابه
Quantum Mechanical Calculations of Photovoltaic and Photoelectronic Properties of Oligoselenophene/Fullerene BHJ Solar Cells
To model the active layer in the hetero-junction solar cells, the C60, C70, PC60BM, PCBDAN fullerenes as acceptor, and (OS)n=1) oligoselenophenes as donor were considered. The (OS)n=14/C60, (OS)n=14/C70, (OS)n=14/PC60BM, and (OS)n=14/PCBDAN blends as a model of the active layer in the BHJ solar cell were chosen, and the optoelectronic properties were studied. The calculated efficiency of these ...
متن کاملSpectral matching and outdoor solar to electrical conversion efficiency in thin-film silicon multi- junction solar cells
Semi-empirical computer modelling is used to investigate spectral matching in tandem and triple-junction thin film silicon solar cells. In amorphous/microcrystalline silicon (a-Si:H/μc-Si:H) tandem cells, current mis-match is offset by an increase in fill-factor, resulting in a broad peak in efficiency versus average photon energy. For a-Si:H/a-Si:H tandem cells, photo-generated currents in bot...
متن کاملNumerical Simulation of CdS/CIGS Tandem Multi-Junction Solar Cells with AMPS-1D
Numerical modeling of polycrystalline thin-film solar cell serves as an imperative procedure to test the suitability of proposed physical clarification and to anticipate the effect of physical changes on cell performance. All in all, this must be conducted with only partial knowledge of input parameters. In this paper, we evaluated the numerical simulation of CdS/CIGS tandem multi junction sola...
متن کاملRecombination in Polymer:Fullerene Solar Cells with OpenCircuit Voltages Approaching and Exceeding 1.0 V
Polymer:fullerene solar cells are demonstrated with power conversion effi ciencies over 7% with blends of PBDTTPD and PC 61 BM. These devices achieve open-circuit voltages ( V oc ) of 0.945 V and internal quantum effi ciencies of 88%, making them an ideal candidate for the large bandgap junction in tandem solar cells. V oc ’s above 1.0 V are obtained when the polymer is blended with multiadduct...
متن کاملN-i-p Micromorph Solar Cells on Aluminium Substrates
The first successful deposition of 'micromorph' silicon tandem solar cells of the n-i-p-n-i-p configuration is reported. In order to implement the 'micromorph' solar cell concept, four key elements had to be prepared: First, the deposition of mid-gap, intrinsic microcrystalline silicon (μc-Si:H) by the 'gas purifier method', second, the amorphous silicon (a-Si:H) n-i-p single junction solar cel...
متن کامل