Designing Parameters for RF CMOS Cells
نویسندگان
چکیده
In this paper, we have investigated the design parameters of RF CMOS cells which will be used for switch in the wireless telecommunication systems. This RF switch is capable to select the data streams from the two antennas for both the transmitting and receiving processes. The results for the development of a cell-library which includes the basics of the circuit elements required for the radio frequency sub-systems of the integrated circuits such as V-I characteristics at low-voltages, contact resistance which is present in the switches and the potential barrier with contacts available in devices has been discussed.
منابع مشابه
Designing of RF Single Balanced Mixer with a 65nm CMOS Technology Dedicated to Low Power Consumption Wireless Applications
The present work consists of designing a Single Balanced Mixer (SBM) with the 65 nm CMOS technology, this for a 1.9 GHz RF channel, dedicated to wireless applications. This paper shows; the polarization chosen for this structure, models of evaluating parameters of the mixer, then simulation of the circuit in 65nm CMOS technology and comparison with previously treated.
متن کاملComparison of RF Inductor Performance Evaluation Methods
— Various model parameter calculation equations of RF CMOS inductors are compared. The calculation equations are using as variables either Y, Z-parameters or S-parameters. Results are based on on-wafer RF S-parameter measurements of a 3.75 turn spiral inductor fabricated in AMIS 0.7 μm CMOS DM1P n-well technology. Results obtained with calculation equations for a differentially driven inductor ...
متن کاملRF CMOS Integrated Circuit: History, Current Status and Future Prospects
As great advancements have been made in CMOS process technology over the past 20 years, RF CMOS circuits operating in the microwave band have rapidly developed from component circuit levels to multiband/multimode transceiver levels. In the next ten years, it is highly likely that the following devices will be realized: (i) versatile transceivers such as those used in software-defined radios (SD...
متن کاملCapacitive Model and S-Parameters of Double-Pole Four-Throw Double-Gate RF CMOS Switch
In this paper, we have analyzed the Double-Pole Four-Throw Double-Gate Radio-Frequency Complementary Metal-Oxide-Semiconductor (DP4T DG RF CMOS) switch using S-parameters for 1 GHz to 60 GHz of frequency range. DP4T DG RF CMOS switch for operation at high frequency is also analyzed with its capacitive model. The results for the development of this proposed switch include the basics of the circu...
متن کاملDesign and Performance Analysis of Low Power RF Operational Amplifier using CMOS and BiCMOS Technology
This paper presents the design and performance comparison of a two stage operational amplifier topology using CMOS and BiCMOS technology. This conventional op amp circuit was designed by using RF model of BSIM3V3 in 0.6 μm CMOS technology and 0.35 μm BiCMOS technology. Both the op amp circuits were designed and simulated, analyzed and performance parameters are compared. The performance paramet...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010