Thermal Mechanisms of Stable Macroscopic Penetration of Applied Currents in High Temperature Superconductors and their Instability Conditions

نویسنده

  • V. R. Romanovskii
چکیده

Macroscopic mechanisms of applied current penetration in high-Tc superconductors are discussed to understand the basic physical trends, which are characteristic for the stable and unstable formation of the thermo-electrodynamics states of high-Tc superconductors placed in DC external magnetic field. The performed analysis shows that the definition of the current stability conditions of high-Tc superconductors must take into consideration the development of the interconnected thermal and electrodynamics states when the temperature of superconductor may stably rise before instability. As a result, the thermal degradation effect of the current-carrying capacity of superconductor exists. The boundary values of the electric field and the current above which the applied current is unstable are defined taking into account the size effect, cooling conditions, non-linear temperature dependences of the critical current density of superconductor. It is proved that the allowable stable values of electric field and current can be both below and above those determined by a priori chosen critical values of the electric field and current of the superconductor. The violation features of the stable current distribution in high-Tc superconductors cooled by liquid coolant are studied. The necessary criteria allowing one to determine the influence of the properties of superconductor and coolant on the current instability onset are written.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Limiting Factors for Stable Operating Conditions of 1G and 2G High-Tc Superconducting Current-Carrying Elements in High Magnetic Fields

The limiting currents stably flowing in the current-carrying elements based on 1G and 2G high-temperature superconductors (HTS) are studied. An analysis of the stability of macroscopic thermal and electrical states in the current charging modes is made in terms of the static zero-dimensional and one-dimensional models. For the coated tapes based on the YBa2Cu307 (Y123), the stability investigat...

متن کامل

Islands of (In-)stability in High Temperature Superconductors

Dendritic flux penetration is a well known phenomenon in high temperature superconductors. We investigated the conditions under which this instability can be observed in different materials. We found three qualitatively different behaviors: dendrite development above a “critical field” and up to a certain temperature, above a “critical field” with no measurable temperature dependence, or no den...

متن کامل

اتصال جوزفسون بین ابررساناهای دمای بالا با ضریب عبور اختیاری

In this paper, a dc Josephson junction between two singlet superconductors (d-wave and s-wave) with arbitrary reflection coefficient has been investigated theoretically. For the case of high Tc superconductors, the c-axes are parallel to an interface with finite transparency and their ab-planes have a mis-orientation. The physics of potential barrier will be demonstrated by a transparency coeff...

متن کامل

Investigation of the influence of electron beam welding current change on the microstructure and mechanical properties of Nb-1Zr advanced allo

The effect of electron beam welding current changes on the microstructure and mechanical properties of the Nb-based alloy has been investigated. The electron beam welding was applied with 4 different currents of 20, 24, 30 and 35 mA on 3mm thick plates. The aspects including different welding regions, geometry and depth of welding penetration, as well as the effect of heat input on the weldabil...

متن کامل

Investigation of the influence of electron beam welding current change on the microstructure and mechanical properties of Nb-1Zr advanced allo

The effect of electron beam welding current changes on the microstructure and mechanical properties of the Nb-based alloy has been investigated. The electron beam welding was applied with 4 different currents of 20, 24, 30 and 35 mA on 3mm thick plates. The aspects including different welding regions, geometry and depth of welding penetration, as well as the effect of heat input on the weldabil...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012